Whether in the wc or in a pool, it from time to time happens that the Energizer is dropped into the water. Nonetheless, it is not because a phone has fallen into the water that it’s unavoidably dead. In fact, it is possible to redo an Energizer that has fallen into the water. To do this, it is needed to respect particular actions. People generally have bad reflexes and this is what can deteriorate the Energizer. We will first discover the methods to be taken after the Energizer has fallen into the water. We will discover in the 2nd place the common mistakes that many people make.
Methods to follow if your Energizer fell into the water
Whenever you wish to restore your Energizer in working order, we advise that you follow the steps listed below.
Don’t attempt to turn the Energizer back on after exiting the water
The first thing to do when the Energizer has fallen into the water is to shut off the phone. In fact, if it did not switch off, turn it off without doing any other tricks. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Energizer is turned on and wet, you can generate a short circuit and as a result toast the phone.
Remove detachable components
When the Energizer is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will be needed to take away the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these items to dry and continue to the following step.
Aspire the water that is in your Energizer
By using a straw, you need to suck up the water that is contained in your Energizer. For this, you simply have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Energizer, you will have the ability to start drying it.
Dry the Energizer
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using méthodes that cause the phone to heat up or damage the phone. When it is done, we suggest you to leave the Energizer in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Energizer.
Reassemble the components and turn on the Energizer
When you have completed the previous steps, your Energizer should be dry. So now you can make an attempt to turn on the Energizer. If perhaps this doesn’t work, we suggest you to wait a few days or to bring the Energizer to a repairman.
What should not be done if the Energizer has fallen into the water
There are a number of stuff not to do when your Energizer has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can destroy the Energizer. Following, it is highly suggested not to use a heat source to dry the Energizer. Indeed, techniques which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the phone, do not shake it. Certainly, it could also ruin the Energizer.
