How to fix a water damaged on Emporia

Whether in the toilet or in a pool, it occasionally occurs that the Emporia is slipped in the water. Even so, it’s not simply because a mobile has fallen in the water that it’s inevitably dead. Certainly, it is possible to redo an Emporia that has fallen in the water. To achieve this, it is required to respect particular steps. People often have bad reflexes and this is what can damage the Emporia. We will first discover the techniques to be taken after the Emporia has fallen into the water. We will discover in the second place the classical mistakes that a large number of people make.water-damaged-Emporia

Methods to follow if your Emporia fell into the water

In the event that you wish to recover your Emporia in operating order, we highly recommend that you follow the steps below.

Do not try to turn the Emporia back on after exiting the water

The very first thing to accomplish when the Emporia has fallen into the water is to turn off the mobile. Certainly, if it did not switch off, turn it off without doing any other tricks. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Emporia is started and wet, you can make a short circuit and therefore toast the mobile.

Remove detachable components

When the Emporia is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it will probably be required to take out the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these items to dry and continue to the following step.

Aspire the water that is in your Emporia

Utilizing a straw, you must suck up the water that is contained in your Emporia. For this, you merely need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Emporia, you will have the capacity to start drying it.

Dry the Emporia

The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using methods that cause the mobile to heat up or damage the mobile. When it is completed, we suggest you to leave the Emporia in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Emporia.

Reassemble the components and turn on the Emporia

When you have completed the prior steps, your Emporia should be dry. So now you can try to turn on the Emporia. If perhaps this doesn’t perform, we suggest you to hang on some days or to bring the Emporia to a repairman.

What should not be done if the Emporia has fallen into the water

You will find a number of things not to accomplish when your Emporia has fallen into the water. The first is to try to turn the mobile back on just after. This can kill the Emporia. Following, it is strongly suggested not to use a heat source to dry the Emporia. Without a doubt, methods such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the mobile, do not shake it. Certainly, it could also ruin the Emporia.