Whether in the toilet or in a pool, it sometimes happens that the Crosscall Core-X5 is slipped in the water. Nevertheless, it isn’t simply because a mobile phone has fallen in the water that it’s obviously dead. In fact, it is possible to redo an Crosscall Core-X5 that has fallen in the water. To accomplish this, it is needed to respect specific actions. People frequently have bad reflexes and this is what can degrade the Crosscall Core-X5. We will first see the techniques to be taken after the Crosscall Core-X5 has fallen into the water. We will see in the secondary place the classical errors that a large number of people make.
Methods to follow in cases where your Crosscall Core-X5 fell into the water
If perhaps you desire to restore your Crosscall Core-X5 in working order, we suggest that you follow the steps below.
Don’t try to turn the Crosscall Core-X5 back on after getting out the water
One thing to perform when the Crosscall Core-X5 has fallen into the water is to turn off the mobile phone. In fact, in cases where it didn’t turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Crosscall Core-X5 is turned on and wet, you might generate a short circuit and therefore toast the mobile phone.
Remove detachable components
Once the Crosscall Core-X5 is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it’ll be needed to remove the shell, the SIM card, the SD card and the electric battery if possible. Once finished, put all of these items to dry and continue to the following step.
Aspire the water that is in your Crosscall Core-X5
Employing a straw, you will need to suck up the water that is contained in your Crosscall Core-X5. For this, you simply need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Crosscall Core-X5, you will have the capacity to start drying it.
Dry the Crosscall Core-X5
The fourth step is to dry the mobile phone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using méthodes that cause the mobile phone to heat up or damage the mobile phone. Once it is performed, we advise you to leave the Crosscall Core-X5 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Crosscall Core-X5.
Reassemble the components and turn on the Crosscall Core-X5
When you have completed the previous steps, your Crosscall Core-X5 should be dry. So now you can try to turn on the Crosscall Core-X5. If perhaps this does not work, we advise you to hold out some days or to bring the Crosscall Core-X5 to a repairshop.
What should not be done in cases where the Crosscall Core-X5 has fallen into the water
You will find a number of points not to perform when ever your Crosscall Core-X5 has fallen into the water. The first is to try to turn the mobile phone back on just after. This can kill the Crosscall Core-X5. Next, it is strongly advised not to use a heat source to dry the Crosscall Core-X5. Certainly, methods such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the mobile phone, do not shake it. In fact, it could also ruin the Crosscall Core-X5.
