Whether in the toilet or in a swimming pool, it from time to time occurs that the Crosscall Core-X4 is slipped into the water. Nevertheless, it isn’t because a mobile phone has fallen into the water that it’s undoubtedly dead. Indeed, it is possible to redo an Crosscall Core-X4 that has fallen into the water. To get this done, it is essential to respect certain actions. People typically have bad reflexes and this is what can degrade the Crosscall Core-X4. We will first discover the methods to be taken after the Crosscall Core-X4 has fallen into the water. We will discover in the secondary place the classical errors that many people make.
Methods to follow in cases where your Crosscall Core-X4 fell into the water
In the event that you wish to restore your Crosscall Core-X4 in operating order, we suggest that you follow the steps listed below.
Don’t try to turn the Crosscall Core-X4 back on after exiting the water
The first thing to perform when the Crosscall Core-X4 has fallen into the water is to shut off the mobile phone. Indeed, in cases where it did not switch off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Crosscall Core-X4 is started and wet, you can generate a short circuit and therefore toast the mobile phone.
Remove detachable components
Once the Crosscall Core-X4 is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it’ll be essential to remove the shell, the SIM card, the SD card and the battery if possible. Once finished, put all of these items to dry and continue to the following step.
Aspire the water that is in your Crosscall Core-X4
Using a straw, you need to suck up the water that is contained in your Crosscall Core-X4. For this, you merely need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Crosscall Core-X4, you will be able to start drying it.
Dry the Crosscall Core-X4
The fourth step is to dry the mobile phone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using methods that cause the mobile phone to heat up or damage the mobile phone. Once it is performed, we advise you to leave the Crosscall Core-X4 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Crosscall Core-X4.
Reassemble the components and turn on the Crosscall Core-X4
When you have completed the prior steps, your Crosscall Core-X4 should be dry. So now you can make an attempt to turn on the Crosscall Core-X4. If this doesn’t do the job, we advise you to hold out a few days or to bring the Crosscall Core-X4 to a repairshop.
What should not be done in cases where the Crosscall Core-X4 has fallen into the water
You will find a number of stuff not to perform when ever your Crosscall Core-X4 has fallen into the water. The first is to make an attempt to turn the mobile phone back on just after. This can kill the Crosscall Core-X4. Next, it is strongly suggested not to use a heat source to dry the Crosscall Core-X4. Certainly, solutions such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the mobile phone, do not shake it. Indeed, it could additionally ruin the Crosscall Core-X4.
