Whether in the wc or in a swimming pool, it from time to time happens that the Crosscall core M5 is dropped in the water. Nonetheless, it’s not because a mobile has fallen in the water that it’s obviously dead. Indeed, it is possible to redo an Crosscall core M5 that has fallen in the water. To achieve this, it is required to respect specific steps. People often have bad reflexes and this is what can damage the Crosscall core M5. We will first see the methods to be taken after the Crosscall core M5 has fallen into the water. We will see in the second place the common errors that a large number of people make.
Methods to follow if your Crosscall core M5 fell into the water
If you need to restore your Crosscall core M5 in operating order, we recommend that you follow the steps below.
Do not attempt to turn the Crosscall core M5 back on after getting out the water
The first thing to accomplish when the Crosscall core M5 has fallen into the water is to shut off the mobile. Indeed, if it didn’t switch off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Crosscall core M5 is started and wet, you may generate a short circuit and therefore toast the mobile.
Remove detachable components
Once the Crosscall core M5 is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will probably be required to remove the shell, the SIM card, the SD card and the electric battery if possible. Once performed, put all of these things to dry and proceed to the next step.
Aspire the water that is in your Crosscall core M5
Utilizing a straw, you will have to suck up the water that is contained in your Crosscall core M5. For doing it, you only have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Crosscall core M5, you will be ready to start drying it.
Dry the Crosscall core M5
The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the mobile to heat up or damage the mobile. Once it is performed, we suggest you to leave the Crosscall core M5 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the Crosscall core M5.
Reassemble the components and turn on the Crosscall core M5
When you have completed the previous steps, your Crosscall core M5 should be dry. So now you can make an attempt to turn on the Crosscall core M5. If this doesn’t perform, we suggest you to hang on a couple of days or to bring the Crosscall core M5 to a repairman.
What should not be done if the Crosscall core M5 has fallen into the water
There are a number of points not to accomplish when your Crosscall core M5 has fallen into the water. The first is to make an attempt to turn the mobile back on just after. This can kill the Crosscall core M5. Next, it is strongly advised not to use a heat source to dry the Crosscall core M5. Without a doubt, methods such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the mobile, do not shake it. In fact, it could as well damage the Crosscall core M5.
