Whether in the toilet or in a swimming pool, it sometimes occurs that the Coolpad Cool 3 Plus is slipped into the water. Even so, it isn’t because a phone has fallen into the water that it’s inevitably dead. In truth, it is possible to redo an Coolpad Cool 3 Plus that has fallen into the water. To get this done, it is essential to respect certain steps. People generally have bad reflexes and this is what can degrade the Coolpad Cool 3 Plus. We will 1st see the steps to be taken after the Coolpad Cool 3 Plus has fallen into the water. We will see in the secondary place the common errors that the majority of people make.
Methods to follow in the event that your Coolpad Cool 3 Plus fell into the water
In the event that you desire to restore your Coolpad Cool 3 Plus in working order, we highly recommend that you follow the steps below.
Don’t attempt to turn the Coolpad Cool 3 Plus back on after exiting the water
The very first thing to perform when the Coolpad Cool 3 Plus has fallen into the water is to switch off the phone. In truth, in the event that it did not turn off, turn it off without doing any other manipulation. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Coolpad Cool 3 Plus is switched on and wet, you can produce a short circuit and consequently toast the phone.
Remove detachable components
When the Coolpad Cool 3 Plus is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will be essential to remove the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these things to dry and continue to the following step.
Aspire the water that is in your Coolpad Cool 3 Plus
Using a straw, you will have to suck up the water that is contained in your Coolpad Cool 3 Plus. For doing it, you merely need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Coolpad Cool 3 Plus, you will have the capacity to start drying it.
Dry the Coolpad Cool 3 Plus
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using techniques that cause the phone to heat up or damage the phone. When it is completed, we recommend you to leave the Coolpad Cool 3 Plus in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Coolpad Cool 3 Plus.
Reassemble the components and turn on the Coolpad Cool 3 Plus
When you have completed the prior steps, your Coolpad Cool 3 Plus should be dry. So now you can make an attempt to turn on the Coolpad Cool 3 Plus. In the event that this does not perform, we recommend you to hang on a couple of days or to bring the Coolpad Cool 3 Plus to a repairman.
What should not be done in the event that the Coolpad Cool 3 Plus has fallen into the water
There are several things not to perform when your Coolpad Cool 3 Plus has fallen into the water. The 1st is to make an attempt to turn the phone back on just after. This can demolish the Coolpad Cool 3 Plus. Next, it is strongly suggested not to use a heat source to dry the Coolpad Cool 3 Plus. Certainly, techniques which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the phone, do not shake it. In fact, it could likewise damage the Coolpad Cool 3 Plus.
