Whether in the wc or in a swimming pool, it occasionally happens that the Cat S32 is slipped in the water. Nonetheless, it is not because a mobile has fallen in the water that it’s inevitably dead. Certainly, it is possible to redo an Cat S32 that has fallen in the water. To accomplish this, it is essential to respect certain steps. People typically have bad reflexes and this is what can damage the Cat S32. We will 1st see the techniques to be taken after the Cat S32 has fallen into the water. We will see in the second place the classical errors that many people make.
Methods to follow in cases where your Cat S32 fell into the water
Whenever you want to restore your Cat S32 in working order, we suggest that you follow the steps below.
Don’t attempt to turn the Cat S32 back on after getting out the water
One thing to accomplish when the Cat S32 has fallen into the water is to shut off the mobile. Certainly, in cases where it didn’t turn off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Cat S32 is started and wet, you may generate a short circuit and therefore toast the mobile.
Remove detachable components
When the Cat S32 is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it will probably be essential to take out the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Cat S32
Utilizing a straw, you have got to suck up the water that is contained in your Cat S32. For this, you just need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Cat S32, you will be able to start drying it.
Dry the Cat S32
The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using méthodes that cause the mobile to heat up or damage the mobile. When it is completed, we recommend you to leave the Cat S32 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Cat S32.
Reassemble the components and turn on the Cat S32
When you have completed the previous steps, your Cat S32 should be dry. So now you can try to turn on the Cat S32. If perhaps this doesn’t do the job, we recommend you to wait a few days or to bring the Cat S32 to a repairman.
What should not be done in cases where the Cat S32 has fallen into the water
You will find a number of stuff not to accomplish when ever your Cat S32 has fallen into the water. The 1st is to try to turn the mobile back on just after. This can destroy the Cat S32. Following, it is highly recommended not to use a heat source to dry the Cat S32. Indeed, solutions which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the mobile, do not shake it. Indeed, it could additionally ruin the Cat S32.
