How to fix a water damaged on Blackview S8

Whether in the wc or in a swimming pool, it sometimes happens that the Blackview S8 is slipped in the water. On the other hand, it’s not because a telephone has fallen in the water that it’s unavoidably dead. In truth, it is possible to redo an Blackview S8 that has fallen in the water. To do this, it is required to respect particular steps. People typically have bad reflexes and this is what can damage the Blackview S8. We will 1st discover the techniques to be taken after the Blackview S8 has fallen into the water. We will discover in the secondary place the classical mistakes that many people make.water-damaged-blackview-s8

Methods to follow if perhaps your Blackview S8 fell into the water

If perhaps you need to restore your Blackview S8 in working order, we highly recommend that you follow the steps below.

Don’t try to turn the Blackview S8 back on after exiting the water

One thing to perform when the Blackview S8 has fallen into the water is to turn off the telephone. In truth, if perhaps it did not switch off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Blackview S8 is started and wet, you can generate a short circuit and consequently toast the telephone.

Remove detachable components

Once the Blackview S8 is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it will probably be required to take away the shell, the SIM card, the SD card and the electric battery if possible. Once carried out, put all of these items to dry and continue to the next step.

Aspire the water that is in your Blackview S8

Employing a straw, you will need to suck up the water that is contained in your Blackview S8. For this, you only have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Blackview S8, you will be ready to start drying it.

Dry the Blackview S8

The fourth step is to dry the telephone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using procédures that cause the telephone to heat up or damage the telephone. Once it is finished, we suggest you to leave the Blackview S8 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Blackview S8.

Reassemble the components and turn on the Blackview S8

When you have completed the prior steps, your Blackview S8 should be dry. So now you can make an attempt to turn on the Blackview S8. If this doesn’t perform, we suggest you to hang on some days or to bring the Blackview S8 to a repairshop.

What should not be done if perhaps the Blackview S8 has fallen into the water

There are several things not to perform when your Blackview S8 has fallen into the water. The 1st is to make an attempt to turn the telephone back on just after. This can kill the Blackview S8. Next, it is strongly suggested not to use a heat source to dry the Blackview S8. Without a doubt, techniques which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the telephone, do not shake it. In fact, it could also damage the Blackview S8.