Whether in the wc or in a pool, it from time to time occurs that the Blackview BV9000 is slipped into the water. However, it is not because a mobile has fallen into the water that it is inevitably dead. In truth, it is feasible to redo an Blackview BV9000 that has fallen into the water. To get this done, it is required to respect particular actions. People generally have bad reflexes and this is what can damage the Blackview BV9000. We will 1st discover the methods to be taken after the Blackview BV9000 has fallen into the water. We will discover in the secondary place the common errors that many people make.
Steps to follow if perhaps your Blackview BV9000 fell into the water
If perhaps you want to recover your Blackview BV9000 in working order, we advise that you follow the steps listed below.
Don’t attempt to turn the Blackview BV9000 back on after getting out the water
The very first thing to accomplish when the Blackview BV9000 has fallen into the water is to turn off the mobile. In truth, if perhaps it did not switch off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Blackview BV9000 is started and wet, you may generate a short circuit and consequently toast the mobile.
Remove detachable components
Once the Blackview BV9000 is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will be required to take away the shell, the SIM card, the SD card and the electric battery if possible. Once done, put all of these things to dry and proceed to the next step.
Aspire the water that is in your Blackview BV9000
Employing a straw, you will need to suck up the water that is contained in your Blackview BV9000. For doing it, you just have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Blackview BV9000, you will have the ability to start drying it.
Dry the Blackview BV9000
The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator several hours. Prevent using solutions that cause the mobile to heat up or damage the mobile. Once it is done, we recommend you to leave the Blackview BV9000 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Blackview BV9000.
Reassemble the components and turn on the Blackview BV9000
When you have completed the prior steps, your Blackview BV9000 should be dry. So now you can try to turn on the Blackview BV9000. If this doesn’t work, we recommend you to wait a couple of days or to bring the Blackview BV9000 to a repairshop.
What should not be done if perhaps the Blackview BV9000 has fallen into the water
You will find several points not to accomplish when ever your Blackview BV9000 has fallen into the water. The 1st is to try to turn the mobile back on just after. This can demolish the Blackview BV9000. Next, it is highly advised not to use a heat source to dry the Blackview BV9000. Certainly, techniques which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the mobile, do not shake it. Certainly, it could additionally ruin the Blackview BV9000.
