Whether in the wc or in a swimming pool, it occasionally happens that the Blackview BV8800 is slipped in the water. However, it isn’t because a phone has fallen in the water that it’s unavoidably dead. In truth, it is feasible to redo an Blackview BV8800 that has fallen in the water. To get this done, it is needed to respect particular steps. People generally have bad reflexes and this is what can deteriorate the Blackview BV8800. We will first of all see the steps to be taken after the Blackview BV8800 has fallen into the water. We will see in the second place the common errors that many people make.
Methods to follow in cases where your Blackview BV8800 fell into the water
Whenever you desire to recover your Blackview BV8800 in working order, we suggest that you follow the steps below.
Do not try to turn the Blackview BV8800 back on after getting out the water
The first thing to do when the Blackview BV8800 has fallen into the water is to shut off the phone. In truth, in cases where it didn’t turn off, turn it off without doing any other manipulation. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Blackview BV8800 is turned on and wet, you can create a short circuit and consequently toast the phone.
Remove detachable components
When the Blackview BV8800 is out of the water and turned off, it will have to be disassembled to the maximum. This means that it’ll be needed to take away the shell, the SIM card, the SD card and the electric battery if possible. When performed, put all of these things to dry and continue to the following step.
Aspire the water that is in your Blackview BV8800
Using a straw, you have got to suck up the water that is contained in your Blackview BV8800. For this, you only have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Blackview BV8800, you will be ready to start drying it.
Dry the Blackview BV8800
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator several hours. Avoid using methods that cause the phone to heat up or damage the phone. When it is performed, we recommend you to leave the Blackview BV8800 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Blackview BV8800.
Reassemble the components and turn on the Blackview BV8800
When you have completed the previous steps, your Blackview BV8800 should be dry. So now you can make an attempt to turn on the Blackview BV8800. If this does not work, we recommend you to wait some days or to bring the Blackview BV8800 to a repairshop.
What should not be done in cases where the Blackview BV8800 has fallen into the water
You will find several stuff not to do when ever your Blackview BV8800 has fallen into the water. The first of all is to make an attempt to turn the phone back on just after. This can demolish the Blackview BV8800. Next, it is highly recommended not to use a heat source to dry the Blackview BV8800. Indeed, solutions which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the phone, do not shake it. In fact, it could as well ruin the Blackview BV8800.
