Whether in the wc or in a pool, it occasionally occurs that the Blackview BV7100 is slipped into the water. However, it’s not simply because a phone has fallen into the water that it’s inevitably dead. Certainly, it is possible to redo an Blackview BV7100 that has fallen into the water. To achieve this, it is required to respect particular actions. People generally have bad reflexes and this is what can degrade the Blackview BV7100. We will first of all discover the steps to be taken after the Blackview BV7100 has fallen into the water. We will discover in the 2nd place the common errors that a large number of people make.
Steps to follow if your Blackview BV7100 fell into the water
Whenever you wish to recover your Blackview BV7100 in working order, we recommend that you follow the steps listed below.
Do not attempt to turn the Blackview BV7100 back on after exiting the water
The very first thing to do when the Blackview BV7100 has fallen into the water is to shut off the phone. Certainly, if it didn’t turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Blackview BV7100 is switched on and wet, you might produce a short circuit and consequently toast the phone.
Remove detachable components
When the Blackview BV7100 is out of the water and turned off, it will have to be disassembled to the maximum. This means that it’ll be required to take away the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these things to dry and proceed to the next step.
Aspire the water that is in your Blackview BV7100
By using a straw, you must suck up the water that is contained in your Blackview BV7100. For doing it, you merely need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Blackview BV7100, you will be able to start drying it.
Dry the Blackview BV7100
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the phone to heat up or damage the phone. When it is performed, we suggest you to leave the Blackview BV7100 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Blackview BV7100.
Reassemble the components and turn on the Blackview BV7100
When you have completed the previous steps, your Blackview BV7100 should be dry. So now you can make an attempt to turn on the Blackview BV7100. If this does not work, we suggest you to wait a couple of days or to bring the Blackview BV7100 to a repairman.
What should not be done if the Blackview BV7100 has fallen into the water
You will find a number of stuff not to do when your Blackview BV7100 has fallen into the water. The first of all is to make an attempt to turn the phone back on just after. This can demolish the Blackview BV7100. Next, it is strongly recommended not to use a heat source to dry the Blackview BV7100. Certainly, techniques such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the phone, do not shake it. In fact, it could also ruin the Blackview BV7100.
