Whether in the toilet or in a swimming pool, it from time to time happens that the Blackview BV6600 is slipped into the water. Even so, it’s not because a phone has fallen into the water that it is unavoidably dead. Indeed, it is possible to redo an Blackview BV6600 that has fallen into the water. To get this done, it is required to respect particular steps. People generally have bad reflexes and this is what can deteriorate the Blackview BV6600. We will 1st discover the steps to be taken after the Blackview BV6600 has fallen into the water. We will discover in the secondary place the classical errors that many people make.
Methods to follow in cases where your Blackview BV6600 fell into the water
Whenever you wish to restore your Blackview BV6600 in working order, we highly recommend that you follow the steps below.
Do not try to turn the Blackview BV6600 back on after exiting the water
The first thing to accomplish when the Blackview BV6600 has fallen into the water is to shut off the phone. Indeed, in cases where it did not switch off, turn it off without doing any other manipulation. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Blackview BV6600 is switched on and wet, you could generate a short circuit and therefore toast the phone.
Remove detachable components
Once the Blackview BV6600 is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it’ll be required to take out the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Blackview BV6600
Using a straw, you have got to suck up the water that is contained in your Blackview BV6600. For this, you only have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Blackview BV6600, you will have the ability to start drying it.
Dry the Blackview BV6600
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator several hours. Avoid using solutions that cause the phone to heat up or damage the phone. Once it is finished, we recommend you to leave the Blackview BV6600 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the Blackview BV6600.
Reassemble the components and turn on the Blackview BV6600
When you have completed the prior steps, your Blackview BV6600 should be dry. So now you can try to turn on the Blackview BV6600. If perhaps this doesn’t perform, we recommend you to hang on some days or to bring the Blackview BV6600 to a repairman.
What should not be done in cases where the Blackview BV6600 has fallen into the water
You will find several things not to accomplish when ever your Blackview BV6600 has fallen into the water. The 1st is to try to turn the phone back on just after. This can kill the Blackview BV6600. Following, it is highly suggested not to use a heat source to dry the Blackview BV6600. In fact, solutions which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the phone, do not shake it. In fact, it could additionally damage the Blackview BV6600.
