How to fix a water damaged on Blackview BV6300

Whether in the wc or in a pool, it occasionally occurs that the Blackview BV6300 is dropped into the water. However, it isn’t because a telephone has fallen into the water that it is undoubtedly dead. Indeed, it is feasible to redo an Blackview BV6300 that has fallen into the water. To do this, it is important to respect certain steps. People generally have bad reflexes and this is what can damage the Blackview BV6300. We will first discover the methods to be taken after the Blackview BV6300 has fallen into the water. We will discover in the secondary place the common mistakes that most people make.water-damaged-blackview-bv6300

Steps to follow if perhaps your Blackview BV6300 fell into the water

If perhaps you desire to restore your Blackview BV6300 in working order, we suggest that you follow the steps below.

Do not attempt to turn the Blackview BV6300 back on after getting out the water

The first thing to perform when the Blackview BV6300 has fallen into the water is to switch off the telephone. Indeed, if perhaps it didn’t switch off, turn it off without doing any other manipulation. If it is already off, do not attempt to turn it back on for the moment. If the Blackview BV6300 is switched on and wet, you can create a short circuit and as a result toast the telephone.

Remove detachable components

Once the Blackview BV6300 is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it’ll be important to remove the shell, the SIM card, the SD card and the electric battery if possible. Once carried out, put all of these things to dry and proceed to the following step.

Aspire the water that is in your Blackview BV6300

By using a straw, you must suck up the water that is contained in your Blackview BV6300. For this, you simply need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Blackview BV6300, you will have the capacity to start drying it.

Dry the Blackview BV6300

The fourth step is to dry the telephone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using methods that cause the telephone to heat up or damage the telephone. Once it is completed, we suggest you to leave the Blackview BV6300 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that remains in the Blackview BV6300.

Reassemble the components and turn on the Blackview BV6300

When you have completed the previous steps, your Blackview BV6300 should be dry. So now you can try to turn on the Blackview BV6300. If this does not function, we suggest you to hold out some days or to bring the Blackview BV6300 to a repairshop.

What should not be done if perhaps the Blackview BV6300 has fallen into the water

You will find several stuff not to perform when ever your Blackview BV6300 has fallen into the water. The first is to try to turn the telephone back on just after. This can destroy the Blackview BV6300. Next, it is strongly suggested not to use a heat source to dry the Blackview BV6300. Indeed, solutions such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the telephone, do not shake it. In fact, it could likewise damage the Blackview BV6300.