Whether in the wc or in a swimming pool, it occasionally happens that the Blackview BV5100 is dropped into the water. However, it is not because a mobile phone has fallen into the water that it’s undoubtedly dead. Certainly, it is feasible to redo an Blackview BV5100 that has fallen into the water. To do this, it is needed to respect specific steps. People often have bad reflexes and this is what can damage the Blackview BV5100. We will 1st see the techniques to be taken after the Blackview BV5100 has fallen into the water. We will see in the second place the classical errors that most people make.
Methods to follow in the event that your Blackview BV5100 fell into the water
If you desire to recover your Blackview BV5100 in working order, we highly recommend that you follow the steps listed below.
Don’t try to turn the Blackview BV5100 back on after exiting the water
One thing to accomplish when the Blackview BV5100 has fallen into the water is to shut off the mobile phone. Certainly, in the event that it didn’t turn off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Blackview BV5100 is started and wet, you could generate a short circuit and as a result toast the mobile phone.
Remove detachable components
When the Blackview BV5100 is out of the water and switched off, it will have to be disassembled to the maximum. This means that it’ll be needed to remove the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Blackview BV5100
By using a straw, you have got to suck up the water that is contained in your Blackview BV5100. For this, you simply need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Blackview BV5100, you will be able to start drying it.
Dry the Blackview BV5100
The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the mobile phone to heat up or damage the mobile phone. When it is done, we recommend you to leave the Blackview BV5100 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Blackview BV5100.
Reassemble the components and turn on the Blackview BV5100
When you have completed the previous steps, your Blackview BV5100 should be dry. So now you can make an attempt to turn on the Blackview BV5100. In the event that this doesn’t work, we recommend you to hang on a couple of days or to bring the Blackview BV5100 to a repairshop.
What should not be done in the event that the Blackview BV5100 has fallen into the water
There are a number of points not to accomplish when your Blackview BV5100 has fallen into the water. The 1st is to make an attempt to turn the mobile phone back on just after. This can demolish the Blackview BV5100. Following, it is strongly suggested not to use a heat source to dry the Blackview BV5100. Indeed, techniques such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the mobile phone, do not shake it. Indeed, it could as well ruin the Blackview BV5100.
