Whether in the wc or in a pool, it sometimes happens that the Blackview BV4900 is dropped in the water. Even so, it is not because a mobile has fallen in the water that it’s unavoidably dead. In fact, it is possible to redo an Blackview BV4900 that has fallen in the water. To get this done, it is essential to respect particular actions. People typically have bad reflexes and this is what can deteriorate the Blackview BV4900. We will first of all see the techniques to be taken after the Blackview BV4900 has fallen into the water. We will see in the 2nd place the common errors that many people make.
Methods to follow in cases where your Blackview BV4900 fell into the water
If perhaps you want to recover your Blackview BV4900 in operating order, we advise that you follow the steps below.
Don’t attempt to turn the Blackview BV4900 back on after getting out the water
The very first thing to perform when the Blackview BV4900 has fallen into the water is to turn off the mobile. In fact, in cases where it didn’t turn off, turn it off without doing any other manipulation. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Blackview BV4900 is turned on and wet, you can generate a short circuit and as a result toast the mobile.
Remove detachable components
Once the Blackview BV4900 is out of the water and switched off, it will have to be disassembled to the maximum. This means that it’ll be essential to take out the shell, the SIM card, the SD card and the battery if possible. Once finished, put all of these things to dry and continue to the following step.
Aspire the water that is in your Blackview BV4900
Utilizing a straw, you have got to suck up the water that is contained in your Blackview BV4900. For doing it, you only have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Blackview BV4900, you will be able to start drying it.
Dry the Blackview BV4900
The fourth step is to dry the mobile. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using méthodes that cause the mobile to heat up or damage the mobile. Once it is done, we advise you to leave the Blackview BV4900 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Blackview BV4900.
Reassemble the components and turn on the Blackview BV4900
When you have completed the prior steps, your Blackview BV4900 should be dry. So now you can make an attempt to turn on the Blackview BV4900. In the event that this doesn’t do the job, we advise you to hang on some days or to bring the Blackview BV4900 to a repairshop.
What should not be done in cases where the Blackview BV4900 has fallen into the water
You will find a number of things not to perform when your Blackview BV4900 has fallen into the water. The first of all is to make an attempt to turn the mobile back on just after. This can demolish the Blackview BV4900. Following, it is highly suggested not to use a heat source to dry the Blackview BV4900. Without a doubt, methods which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the mobile, do not shake it. Certainly, it could as well ruin the Blackview BV4900.
