Whether in the wc or in a pool, it occasionally occurs that the Blackview BL5100 Pro is dropped in the water. Nonetheless, it isn’t because a cellphone has fallen in the water that it is obviously dead. In fact, it is possible to redo an Blackview BL5100 Pro that has fallen in the water. To accomplish this, it is necessary to respect particular steps. People frequently have bad reflexes and this is what can degrade the Blackview BL5100 Pro. We will 1st see the methods to be taken after the Blackview BL5100 Pro has fallen into the water. We will see in the second place the common mistakes that a good number of people make.
Methods to follow if perhaps your Blackview BL5100 Pro fell into the water
In the event that you desire to recover your Blackview BL5100 Pro in working order, we advise that you follow the steps listed below.
Do not try to turn the Blackview BL5100 Pro back on after exiting the water
The very first thing to perform when the Blackview BL5100 Pro has fallen into the water is to switch off the cellphone. In fact, if perhaps it didn’t switch off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Blackview BL5100 Pro is turned on and wet, you might produce a short circuit and consequently toast the cellphone.
Remove detachable components
When the Blackview BL5100 Pro is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it will be necessary to remove the shell, the SIM card, the SD card and the battery if possible. When finished, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Blackview BL5100 Pro
By using a straw, you must suck up the water that is contained in your Blackview BL5100 Pro. For this, you simply need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Blackview BL5100 Pro, you will have the capacity to start drying it.
Dry the Blackview BL5100 Pro
The fourth step is to dry the cellphone. For this, we recommend you to put it in front of a ventilator several hours. Avoid using methods that cause the cellphone to heat up or damage the cellphone. When it is performed, we recommend you to leave the Blackview BL5100 Pro in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Blackview BL5100 Pro.
Reassemble the components and turn on the Blackview BL5100 Pro
When you have completed the prior steps, your Blackview BL5100 Pro should be dry. So now you can make an attempt to turn on the Blackview BL5100 Pro. In the event that this doesn’t do the job, we recommend you to wait a couple of days or to bring the Blackview BL5100 Pro to a repairman.
What should not be done if perhaps the Blackview BL5100 Pro has fallen into the water
You will find several things not to perform when ever your Blackview BL5100 Pro has fallen into the water. The 1st is to make an attempt to turn the cellphone back on just after. This can demolish the Blackview BL5100 Pro. Next, it is strongly advised not to use a heat source to dry the Blackview BL5100 Pro. Without a doubt, techniques which include oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the cellphone, do not shake it. In fact, it could additionally damage the Blackview BL5100 Pro.
