How to fix a water damaged on Blackview A30

Whether in the toilet or in a pool, it from time to time occurs that the Blackview A30 is dropped into the water. On the other hand, it is not simply because a telephone has fallen into the water that it is obviously dead. In fact, it is possible to redo an Blackview A30 that has fallen into the water. To do this, it is necessary to respect specific steps. People frequently have bad reflexes and this is what can damage the Blackview A30. We will first of all see the techniques to be taken after the Blackview A30 has fallen into the water. We will see in the 2nd place the common errors that many people make.water-damaged-blackview-a30

Methods to follow in cases where your Blackview A30 fell into the water

Whenever you need to restore your Blackview A30 in working order, we recommend that you follow the steps listed below.

Do not attempt to turn the Blackview A30 back on after exiting the water

The very first thing to do when the Blackview A30 has fallen into the water is to shut off the telephone. In fact, in cases where it didn’t turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Blackview A30 is switched on and wet, you could generate a short circuit and as a result toast the telephone.

Remove detachable components

When the Blackview A30 is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it’ll be necessary to remove the shell, the SIM card, the SD card and the battery if possible. When completed, put all of these things to dry and continue to the following step.

Aspire the water that is in your Blackview A30

Utilizing a straw, you need to suck up the water that is contained in your Blackview A30. For this, you only have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Blackview A30, you will be ready to start drying it.

Dry the Blackview A30

The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using méthodes that cause the telephone to heat up or damage the telephone. When it is completed, we advise you to leave the Blackview A30 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Blackview A30.

Reassemble the components and turn on the Blackview A30

When you have completed the prior steps, your Blackview A30 should be dry. So now you can try to turn on the Blackview A30. If perhaps this does not function, we advise you to wait a few days or to bring the Blackview A30 to a repairshop.

What should not be done in cases where the Blackview A30 has fallen into the water

There are a number of things not to do when ever your Blackview A30 has fallen into the water. The first of all is to try to turn the telephone back on just after. This can kill the Blackview A30. Next, it is highly recommended not to use a heat source to dry the Blackview A30. Indeed, techniques which include oven or hair dryer heat the components and may damage them. At last, to get the water out of the telephone, do not shake it. In fact, it could also ruin the Blackview A30.