Whether in the toilet or in a swimming pool, it sometimes happens that the Blackview A20 is dropped in the water. On the other hand, it is not because a mobile phone has fallen in the water that it’s inevitably dead. Certainly, it is feasible to redo an Blackview A20 that has fallen in the water. To do this, it is essential to respect particular actions. People typically have bad reflexes and this is what can degrade the Blackview A20. We will 1st see the techniques to be taken after the Blackview A20 has fallen into the water. We will see in the second place the common errors that the majority of people make.
Steps to follow in cases where your Blackview A20 fell into the water
If you desire to restore your Blackview A20 in operating order, we suggest that you follow the steps below.
Do not try to turn the Blackview A20 back on after exiting the water
The very first thing to do when the Blackview A20 has fallen into the water is to shut off the mobile phone. Certainly, in cases where it did not switch off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Blackview A20 is turned on and wet, you could produce a short circuit and consequently toast the mobile phone.
Remove detachable components
Once the Blackview A20 is out of the water and switched off, it will have to be disassembled to the maximum. This means that it’ll be essential to take away the shell, the SIM card, the SD card and the battery if possible. Once finished, put all of these things to dry and continue to the following step.
Aspire the water that is in your Blackview A20
By using a straw, you need to suck up the water that is contained in your Blackview A20. For doing it, you only need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Blackview A20, you will be able to start drying it.
Dry the Blackview A20
The fourth step is to dry the mobile phone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the mobile phone to heat up or damage the mobile phone. Once it is performed, we advise you to leave the Blackview A20 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Blackview A20.
Reassemble the components and turn on the Blackview A20
When you have completed the prior steps, your Blackview A20 should be dry. So now you can make an attempt to turn on the Blackview A20. In the event that this does not do the job, we advise you to hold out a few days or to bring the Blackview A20 to a repairshop.
What should not be done in cases where the Blackview A20 has fallen into the water
There are a number of stuff not to do when ever your Blackview A20 has fallen into the water. The 1st is to make an attempt to turn the mobile phone back on just after. This can kill the Blackview A20. Next, it is highly suggested not to use a heat source to dry the Blackview A20. Without a doubt, techniques which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile phone, do not shake it. Certainly, it could likewise damage the Blackview A20.
