Whether in the toilet or in a pool, it sometimes occurs that the ARCHOS Oxygen 57 is slipped in the water. Nevertheless, it’s not because a telephone has fallen in the water that it is undoubtedly dead. In fact, it is possible to redo an ARCHOS Oxygen 57 that has fallen in the water. To get this done, it is necessary to respect specific steps. People frequently have bad reflexes and this is what can degrade the ARCHOS Oxygen 57. We will first of all discover the techniques to be taken after the ARCHOS Oxygen 57 has fallen into the water. We will discover in the second place the classical mistakes that most people make.
Methods to follow if your ARCHOS Oxygen 57 fell into the water
If perhaps you desire to restore your ARCHOS Oxygen 57 in working order, we highly recommend that you follow the steps below.
Do not attempt to turn the ARCHOS Oxygen 57 back on after getting out the water
The very first thing to accomplish when the ARCHOS Oxygen 57 has fallen into the water is to turn off the telephone. In fact, if it didn’t turn off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the ARCHOS Oxygen 57 is switched on and wet, you might produce a short circuit and as a result toast the telephone.
Remove detachable components
When the ARCHOS Oxygen 57 is out of the water and turned off, it will have to be disassembled to the maximum. This implies that it will be necessary to remove the shell, the SIM card, the SD card and the battery if possible. When done, put all of these things to dry and proceed to the next step.
Aspire the water that is in your ARCHOS Oxygen 57
Employing a straw, you have got to suck up the water that is contained in your ARCHOS Oxygen 57. For this, you simply have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your ARCHOS Oxygen 57, you will be able to start drying it.
Dry the ARCHOS Oxygen 57
The fourth step is to dry the telephone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using techniques that cause the telephone to heat up or damage the telephone. When it is completed, we suggest you to leave the ARCHOS Oxygen 57 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the ARCHOS Oxygen 57.
Reassemble the components and turn on the ARCHOS Oxygen 57
When you have completed the previous steps, your ARCHOS Oxygen 57 should be dry. So now you can try to turn on the ARCHOS Oxygen 57. In the event that this doesn’t function, we suggest you to wait some days or to bring the ARCHOS Oxygen 57 to a repairshop.
What should not be done if the ARCHOS Oxygen 57 has fallen into the water
There are several stuff not to accomplish when your ARCHOS Oxygen 57 has fallen into the water. The first of all is to try to turn the telephone back on just after. This can demolish the ARCHOS Oxygen 57. Next, it is highly suggested not to use a heat source to dry the ARCHOS Oxygen 57. In fact, techniques such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the telephone, do not shake it. Certainly, it could also damage the ARCHOS Oxygen 57.
