Whether in the toilet or in a swimming pool, it occasionally happens that the Alcatel U3 is dropped in the water. On the other hand, it isn’t because a mobile has fallen in the water that it is undoubtedly dead. Indeed, it is possible to redo an Alcatel U3 that has fallen in the water. To accomplish this, it is needed to respect specific actions. People typically have bad reflexes and this is what can deteriorate the Alcatel U3. We will 1st see the techniques to be taken after the Alcatel U3 has fallen into the water. We will see in the second place the common errors that a good number of people make.
Methods to follow in the event that your Alcatel U3 fell into the water
In the event that you desire to restore your Alcatel U3 in working order, we suggest that you follow the steps below.
Don’t attempt to turn the Alcatel U3 back on after exiting the water
The very first thing to do when the Alcatel U3 has fallen into the water is to switch off the mobile. Indeed, in the event that it didn’t turn off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Alcatel U3 is started and wet, you could produce a short circuit and consequently toast the mobile.
Remove detachable components
When the Alcatel U3 is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it will be needed to take out the shell, the SIM card, the SD card and the battery if possible. When done, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Alcatel U3
Utilizing a straw, you need to suck up the water that is contained in your Alcatel U3. For doing it, you merely have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Alcatel U3, you will have the capacity to start drying it.
Dry the Alcatel U3
The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the mobile to heat up or damage the mobile. When it is performed, we recommend you to leave the Alcatel U3 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Alcatel U3.
Reassemble the components and turn on the Alcatel U3
When you have completed the previous steps, your Alcatel U3 should be dry. So now you can try to turn on the Alcatel U3. If this doesn’t perform, we recommend you to hold out a few days or to bring the Alcatel U3 to a repairman.
What should not be done in the event that the Alcatel U3 has fallen into the water
There are a number of things not to do when your Alcatel U3 has fallen into the water. The 1st is to try to turn the mobile back on just after. This can demolish the Alcatel U3. Following, it is strongly advised not to use a heat source to dry the Alcatel U3. In fact, methods which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile, do not shake it. In fact, it could likewise ruin the Alcatel U3.
