How to fix a water damaged on Alcatel A3 XL

Whether in the toilet or in a swimming pool, it occasionally happens that the Alcatel A3 XL is dropped into the water. Nonetheless, it isn’t simply because a cellphone has fallen into the water that it’s obviously dead. Certainly, it is possible to redo an Alcatel A3 XL that has fallen into the water. To do this, it is required to respect certain actions. People often have bad reflexes and this is what can damage the Alcatel A3 XL. We will first of all discover the methods to be taken after the Alcatel A3 XL has fallen into the water. We will discover in the secondary place the common mistakes that a large number of people make.water-damaged-alcatel-a3-xl

Steps to follow if your Alcatel A3 XL fell into the water

Whenever you wish to recover your Alcatel A3 XL in operating order, we recommend that you follow the steps listed below.

Do not attempt to turn the Alcatel A3 XL back on after getting out the water

The very first thing to accomplish when the Alcatel A3 XL has fallen into the water is to switch off the cellphone. Certainly, if it did not switch off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Alcatel A3 XL is turned on and wet, you can produce a short circuit and consequently toast the cellphone.

Remove detachable components

Once the Alcatel A3 XL is out of the water and turned off, it will have to be disassembled to the maximum. This implies that it will be required to take away the shell, the SIM card, the SD card and the electric battery if possible. Once done, put all of these things to dry and continue to the following step.

Aspire the water that is in your Alcatel A3 XL

Using a straw, you will need to suck up the water that is contained in your Alcatel A3 XL. For doing it, you simply have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Alcatel A3 XL, you will be ready to start drying it.

Dry the Alcatel A3 XL

The fourth step is to dry the cellphone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the cellphone to heat up or damage the cellphone. Once it is done, we recommend you to leave the Alcatel A3 XL in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Alcatel A3 XL.

Reassemble the components and turn on the Alcatel A3 XL

When you have completed the prior steps, your Alcatel A3 XL should be dry. So now you can try to turn on the Alcatel A3 XL. If perhaps this does not perform, we recommend you to wait a couple of days or to bring the Alcatel A3 XL to a repairshop.

What should not be done if the Alcatel A3 XL has fallen into the water

You will find a number of things not to accomplish when ever your Alcatel A3 XL has fallen into the water. The first of all is to try to turn the cellphone back on just after. This can destroy the Alcatel A3 XL. Next, it is strongly suggested not to use a heat source to dry the Alcatel A3 XL. Without a doubt, techniques which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the cellphone, do not shake it. Indeed, it could likewise damage the Alcatel A3 XL.