Whether in the toilet or in a swimming pool, it occasionally occurs that the Alcatel 3L is dropped into the water. However, it isn’t simply because a phone has fallen into the water that it’s inevitably dead. In fact, it is possible to redo an Alcatel 3L that has fallen into the water. To achieve this, it is necessary to respect particular steps. People typically have bad reflexes and this is what can damage the Alcatel 3L. We will 1st see the methods to be taken after the Alcatel 3L has fallen into the water. We will see in the 2nd place the common errors that most people make.
Steps to follow in the event that your Alcatel 3L fell into the water
If you want to restore your Alcatel 3L in operating order, we advise that you follow the steps below.
Do not try to turn the Alcatel 3L back on after getting out the water
The first thing to accomplish when the Alcatel 3L has fallen into the water is to shut off the phone. In fact, in the event that it did not switch off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Alcatel 3L is turned on and wet, you can generate a short circuit and consequently toast the phone.
Remove detachable components
When the Alcatel 3L is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it’ll be necessary to take away the shell, the SIM card, the SD card and the electric battery if possible. When performed, put all of these things to dry and continue to the next step.
Aspire the water that is in your Alcatel 3L
By using a straw, you need to suck up the water that is contained in your Alcatel 3L. For this, you merely have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Alcatel 3L, you will have the capacity to start drying it.
Dry the Alcatel 3L
The fourth step is to dry the phone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using methods that cause the phone to heat up or damage the phone. When it is completed, we advise you to leave the Alcatel 3L in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Alcatel 3L.
Reassemble the components and turn on the Alcatel 3L
When you have completed the previous steps, your Alcatel 3L should be dry. So now you can make an attempt to turn on the Alcatel 3L. In the event that this doesn’t function, we advise you to wait some days or to bring the Alcatel 3L to a repairman.
What should not be done in the event that the Alcatel 3L has fallen into the water
There are a number of points not to accomplish when your Alcatel 3L has fallen into the water. The 1st is to make an attempt to turn the phone back on just after. This can demolish the Alcatel 3L. Following, it is highly advised not to use a heat source to dry the Alcatel 3L. In fact, techniques such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. Certainly, it could also ruin the Alcatel 3L.
