How to fix a water damaged on Alcatel 3c

Whether in the wc or in a swimming pool, it from time to time occurs that the Alcatel 3c is slipped in the water. Nonetheless, it’s not simply because a telephone has fallen in the water that it is inevitably dead. In truth, it is possible to redo an Alcatel 3c that has fallen in the water. To get this done, it is required to respect specific actions. People typically have bad reflexes and this is what can deteriorate the Alcatel 3c. We will 1st discover the techniques to be taken after the Alcatel 3c has fallen into the water. We will discover in the secondary place the classical mistakes that the majority of people make.water-damaged-Alcatel 3c

Steps to follow if your Alcatel 3c fell into the water

If perhaps you wish to restore your Alcatel 3c in working order, we advise that you follow the steps listed below.

Don’t attempt to turn the Alcatel 3c back on after exiting the water

The very first thing to accomplish when the Alcatel 3c has fallen into the water is to shut off the telephone. In truth, if it did not turn off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Alcatel 3c is turned on and wet, you can generate a short circuit and therefore toast the telephone.

Remove detachable components

When the Alcatel 3c is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it’ll be required to remove the shell, the SIM card, the SD card and the electric battery if possible. When completed, put all of these things to dry and proceed to the following step.

Aspire the water that is in your Alcatel 3c

By using a straw, you need to suck up the water that is contained in your Alcatel 3c. For this, you merely need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Alcatel 3c, you will have the ability to start drying it.

Dry the Alcatel 3c

The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using methods that cause the telephone to heat up or damage the telephone. When it is completed, we recommend you to leave the Alcatel 3c in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the Alcatel 3c.

Reassemble the components and turn on the Alcatel 3c

When you have completed the prior steps, your Alcatel 3c should be dry. So now you can make an attempt to turn on the Alcatel 3c. In the event that this doesn’t work, we recommend you to wait some days or to bring the Alcatel 3c to a repairman.

What should not be done if the Alcatel 3c has fallen into the water

You will find a number of things not to accomplish when your Alcatel 3c has fallen into the water. The 1st is to make an attempt to turn the telephone back on just after. This can kill the Alcatel 3c. Next, it is strongly advised not to use a heat source to dry the Alcatel 3c. In fact, techniques such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the telephone, do not shake it. Indeed, it could as well damage the Alcatel 3c.