How to fix a water damaged on ALCATEL 1X

Whether in the wc or in a swimming pool, it from time to time occurs that the ALCATEL 1X is slipped into the water. Nevertheless, it’s not simply because a mobile phone has fallen into the water that it is unavoidably dead. In fact, it is feasible to redo an ALCATEL 1X that has fallen into the water. To achieve this, it is essential to respect specific steps. People frequently have bad reflexes and this is what can degrade the ALCATEL 1X. We will first discover the methods to be taken after the ALCATEL 1X has fallen into the water. We will discover in the secondary place the classical errors that many people make.water-damaged-ALCATEL 1X

Methods to follow if your ALCATEL 1X fell into the water

Whenever you desire to recover your ALCATEL 1X in operating order, we advise that you follow the steps below.

Do not try to turn the ALCATEL 1X back on after getting out the water

The first thing to perform when the ALCATEL 1X has fallen into the water is to switch off the mobile phone. In fact, if it did not turn off, turn it off without doing any other manipulation. In the event that it is already off, do not try to turn it back on for the moment. In the event that the ALCATEL 1X is switched on and wet, you could generate a short circuit and consequently toast the mobile phone.

Remove detachable components

Once the ALCATEL 1X is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it’ll be essential to remove the shell, the SIM card, the SD card and the electric battery if possible. Once finished, put all of these items to dry and proceed to the next step.

Aspire the water that is in your ALCATEL 1X

Employing a straw, you need to suck up the water that is contained in your ALCATEL 1X. For this, you only need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your ALCATEL 1X, you will have the capacity to start drying it.

Dry the ALCATEL 1X

The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using techniques that cause the mobile phone to heat up or damage the mobile phone. Once it is done, we recommend you to leave the ALCATEL 1X in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the ALCATEL 1X.

Reassemble the components and turn on the ALCATEL 1X

When you have completed the prior steps, your ALCATEL 1X should be dry. So now you can try to turn on the ALCATEL 1X. If this doesn’t function, we recommend you to wait a couple of days or to bring the ALCATEL 1X to a repairman.

What should not be done if the ALCATEL 1X has fallen into the water

There are several points not to perform when your ALCATEL 1X has fallen into the water. The first is to try to turn the mobile phone back on just after. This can kill the ALCATEL 1X. Following, it is strongly recommended not to use a heat source to dry the ALCATEL 1X. Without a doubt, methods which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile phone, do not shake it. In fact, it could likewise ruin the ALCATEL 1X.