How to fix a water damaged on Acer

Whether in the wc or in a swimming pool, it sometimes occurs that the Acer is dropped into the water. However, it’s not simply because a mobile has fallen into the water that it is undoubtedly dead. In fact, it is feasible to redo an Acer that has fallen into the water. To achieve this, it is necessary to respect particular actions. People frequently have bad reflexes and this is what can degrade the Acer. We will 1st discover the steps to be taken after the Acer has fallen into the water. We will discover in the second place the common mistakes that a good number of people make.water-damaged-Acer

Methods to follow if perhaps your Acer fell into the water

If you desire to restore your Acer in operating order, we highly recommend that you follow the steps below.

Do not attempt to turn the Acer back on after getting out the water

The very first thing to perform when the Acer has fallen into the water is to switch off the mobile. In fact, if perhaps it didn’t turn off, turn it off without doing any other tricks. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Acer is turned on and wet, you may generate a short circuit and as a result toast the mobile.

Remove detachable components

When the Acer is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it will probably be necessary to take away the shell, the SIM card, the SD card and the electric battery if possible. When done, put all of these items to dry and continue to the following step.

Aspire the water that is in your Acer

Utilizing a straw, you must suck up the water that is contained in your Acer. For this, you just need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Acer, you will be ready to start drying it.

Dry the Acer

The fourth step is to dry the mobile. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using methods that cause the mobile to heat up or damage the mobile. When it is finished, we advise you to leave the Acer in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Acer.

Reassemble the components and turn on the Acer

When you have completed the previous steps, your Acer should be dry. So now you can try to turn on the Acer. If this doesn’t work, we advise you to hold out some days or to bring the Acer to a repairman.

What should not be done if perhaps the Acer has fallen into the water

You will find a number of stuff not to perform when your Acer has fallen into the water. The 1st is to try to turn the mobile back on just after. This can demolish the Acer. Next, it is strongly recommended not to use a heat source to dry the Acer. Indeed, methods which include oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the mobile, do not shake it. Certainly, it could as well damage the Acer.