Blackview P6000: Wifi Authentication Problem

Oftentimes, the Blackview P6000 displays the Authentication Problem message when ever you try to connect to a Wi-Fi network. This kind of error message can potentially come from a lot of places. So, so that you can connect properly to the Wifi network with your Blackview P6000, we decided to write this tuto. So we will observe together what to do and where to look to resolve this problem of Wifi authentication. We will see at 1st what you need to do on the Blackview P6000. Finally, we will see what it truly is required to do and check on your Wifi box.

How to proceed when the Blackview P6000 has an authentication problem on the Wifi network

Forget the Wifi network on your Blackview P6000

Whenever the Wi-Fi network to which you want to connect has been changed since your last authentication, your Blackview P6000 may display the message: Authentication or authentication error . Whenever the problem comes from there, the solution is quite simple. Simply forget about the Wifi network in your Blackview P6000. To accomplish this, go to the settings of the Wifi network and keep pressed on the network in question. You will after that have the option to choose the option: Forget this network . When it’s carried out, you can try again to connect to the Wifi network. If perhaps the problem is not solved, go to the next step.

Press the box button

Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may possibly happen to have a problem of authentication Wifi on the Blackview P6000 because the box is not in Synchronization mode . If you would like to activate the synchronization mode of your box, it truly is very basic. You should find a synchronization button to press. When this is carried out, a light will most of the time start blinking. You can after that try to reconnect to the Wifi network with your Blackview P6000. Whenever it still does not function, go to the next trick.

Retype Password

Oftentimes the authentication problem originates from the way you type the Wifi network security password. Indeed, it truly is sometimes subtle to type a security password Wifi on its Blackview P6000. We for that reason advise you to try all the following possibilities:

  • Type the code without spaces or hyphens
  • Type the security password in uppercase
  • Type the security password in lowercase

Restart your box

As in a great many pc problems, the solution is at times very simple. Indeed, 80% of the pc problems are solved by restarting the machine. We therefore advise you to restart your box and your Blackview P6000. After that try to reconnect with your Blackview P6000.

Check box settings

Whenever non-e of the prior solutions did function, the problem could be found to be on the box of your provider. It will for that reason be required to go in the parameters of the box and to check in cases where the system of key is in WPA / WPA2 . Whenever this is not the case, choose this option. After that try to connect your Blackview P6000 again to Wifi. Whenever the authentication problem persists, we suggest that you contact your service provider or a telephone store.