Blackview MAX 1: Wifi Authentication Problem

From time to time, the Blackview MAX 1 displays the Authentication Problem message when you try to connect to a Wi-Fi network. This sort of error message can possibly result from a lot of places. So, so that you can connect properly to the Wifi network with your Blackview MAX 1, we decided to write this tuto. So we will see together what to do and where to look to resolve this issue of Wifi authentication. We will see at initially what you must do on the Blackview MAX 1. At last, we will see what it is required to do and check on your Wifi box.

How to proceed when the Blackview MAX 1 has an authentication problem on the Wifi network

Forget the Wifi network on your Blackview MAX 1

Whenever the Wi-Fi network to which you want to connect has been changed since your last authentication, your Blackview MAX 1 may display the text: Authentication or authentication error . Whenever the issue comes from there, the solution is straightforward. Simply forget about the Wifi network in your Blackview MAX 1. To do this, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to choose the option: Forget this network . Once it is completed, you can try again to connect to the Wifi network. If the issue is not resolved, go to the next section.

Press the box button

Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may possibly happen to have a issue of authentication Wifi on the Blackview MAX 1 because the box is not in Synchronization mode . If you wish to activate the synchronization mode of your box, it is very basic. You should find a synchronization button to press. When ever this is completed, a light will normally start blinking. You can then try to reconnect to the Wifi network with your Blackview MAX 1. Whenever it still doesn’t work, go to the next trick.

Retype Security password

From time to time the authentication problem comes from the way you type the Wifi network password. Indeed, it is sometimes subtle to type a password Wifi on its Blackview MAX 1. We for that reason advise you to try all the following possibilities:

  • Type the code without spaces or hyphens
  • Type the password in uppercase
  • Type the password in lowercase

Restart your box

As in a great many pc problems, the solution is at times very simple. Indeed, 80% of the pc problems are solved by restarting the machine. We therefore advise you to restart your box and your Blackview MAX 1. Then try to reconnect with your Blackview MAX 1.

Check box settings

Whenever none of the previous solutions did work, the problem could be found to be on the box of your provider. It will for that reason be required to go in the parameters of the box and to check if perhaps the system of key is in WPA / WPA2 . Whenever this is not the circumstance, choose this option. Then try to connect your Blackview MAX 1 again to Wifi. Whenever the authentication issue remains, we advise that you contact your service provider or a telephone retail store.