Oftentimes, the Blackview BV7200 displays the Authentication Problem message when you try to connect to a Wi-Fi network. This kind of error message can potentially result from many places. So, so that you may connect properly to the Wifi network with your Blackview BV7200, we decided to write this guide. So we will see together what to do and where to look to resolve this problem of Wifi authentication. We will see at initially what you must do on the Blackview BV7200. Finally, we will see what it can be necessary to do and check on your Wifi box.
What to do when the Blackview BV7200 has an authentication problem on the Wifi network
Forget the Wifi network on your Blackview BV7200
In cases where the Wi-Fi network to which you want to connect has been changed since your last authentication, your Blackview BV7200 may display the message: Authentication or authentication error . In cases where the problem comes from there, the answer is quite easy. Simply forget about the Wifi network in your Blackview BV7200. To get this done, go to the settings of the Wifi network and keep pressed on the network in question. You will after that have the option to choose the option: Forget this network . Once it’s done, you may try again to connect to the Wifi network. If perhaps the problem is not solved, go to the next section.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it might happen to have a problem of authentication Wifi on the Blackview BV7200 because the box is not in Synchronization mode . If you wish to activate the synchronization mode of your box, it can be extremely basic. You should find a synchronization button to press. When ever this is done, a light will most of the time start blinking. You may after that try to reconnect to the Wifi network with your Blackview BV7200. In cases where it still will not function, go to the next trick.
Retype Password
Oftentimes the authentication problem comes from the method you type the Wifi network password. In truth, it can be sometimes subtle to type a password Wifi on its Blackview BV7200. We consequently advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the password in uppercase
- Type the password in lowercase
Restart your box
As in several laptop problems, the solution is at times extremely simple. In truth, 80% of the laptop problems are solved by restarting the machine. We therefore recommend you to restart your box and your Blackview BV7200. Then try to reconnect with your Blackview BV7200.
Check box settings
In cases where non-e of the prior solutions did function, the problem could possibly be found to be on the box of your provider. It will consequently be necessary to go in the parameters of the box and to test in the event that the system of key is in WPA / WPA2 . In cases where this is not the circumstance, choose this option. Then try to connect your Blackview BV7200 again to Wifi. In cases where the authentication problem carries on, we suggest that you contact your service provider or a telephone store.