Sometimes, the Blackview BL6000 displays the Authentication Problem message when ever you try to connect to a Wi-Fi network. This sort of error message can potentially come from several places. So, so that you may connect properly to the Wifi network with your Blackview BL6000, we decided to produce this tuto. So we will see together what to do and where to look to solve this issue of Wifi authentication. We will see at initially what you must do on the Blackview BL6000. Finally, we will see what it’s required to do and check on your Wifi box.
How to proceed when the Blackview BL6000 has an authentication problem on the Wifi network
Forget the Wifi network on your Blackview BL6000
If the Wi-Fi network to which you wish to connect has been changed since your last authentication, your Blackview BL6000 may display the message: Authentication or authentication error . If the trouble comes from there, the solution is quite easy. Simply forget about the Wifi network in your Blackview BL6000. To get this done, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to select the option: Forget this network . Once it’s done, you may try again to connect to the Wifi network. In the event that the trouble is not fixed, go to the next section.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it might happen to have a trouble of authentication Wifi on the Blackview BL6000 because the box is not in Synchronization mode . If you want to activate the synchronization mode of your box, it’s extremely simple. You should find a synchronization button to press. When this is done, a light will most of the time start blinking. You can actually then try to reconnect to the Wifi network with your Blackview BL6000. If it still doesn’t work, go to the next trick.
Retype Security password
Sometimes the authentication problem originates from the technique you type the Wifi network security password. In truth, it’s sometimes subtle to type a security password Wifi on its Blackview BL6000. We therefore advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the security password in uppercase
- Type the security password in lowercase
Restart your box
As in lots of laptop problems, the solution is oftentimes extremely simple. In truth, 80% of the laptop problems are solved by restarting the machine. We therefore advise you to restart your box and your Blackview BL6000. After that try to reconnect with your Blackview BL6000.
Check box settings
If none of the prior solutions did work, the problem might be found to be on the box of your provider. It will therefore be required to go in the parameters of the box and to check if perhaps the system of key is in WPA / WPA2 . If this is not the circumstance, select this option. After that try to connect your Blackview BL6000 again to Wifi. If the authentication trouble continues, we advise that you contact your service provider or a telephone retail store.
