From time to time, the Blackview A100 displays the Authentication Problem message when you try to connect to a Wi-Fi network. This kind of error message can possibly sourced from several places. So, so that you can actually connect properly to the Wifi network with your Blackview A100, we decided to write this tuto. So we will discover together what to do and where to look to resolve this problem of Wifi authentication. We will see at initially what you have to do on the Blackview A100. Finally, we will see what it can be necessary to do and check on your Wifi box.
How to proceed when the Blackview A100 has an authentication problem on the Wifi network
Forget the Wifi network on your Blackview A100
If the Wi-Fi network to which you desire to connect has been changed since your last authentication, your Blackview A100 may display the text: Authentication or authentication error . If the issue comes from there, the answer is fairly simple. Just forget about the Wifi network in your Blackview A100. To get this done, go to the settings of the Wifi network and keep pressed on the network in question. You will after that have the option to choose the option: Forget this network . Once it’s carried out, you can actually try again to connect to the Wifi network. If perhaps the issue is not fixed, go to the next section.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may possibly happen to have a issue of authentication Wifi on the Blackview A100 because the box is not in Synchronization mode . If you wish to activate the synchronization mode of your box, it can be incredibly basic. You should find a synchronization button to press. When ever this is carried out, a light will most of the time start blinking. You’re able to after that try to reconnect to the Wifi network with your Blackview A100. If it still does not work, go to the next trick.
Retype Password
From time to time the authentication problem originates from the technique you type the Wifi network security password. In truth, it can be sometimes subtle to type a security password Wifi on its Blackview A100. We consequently advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the security password in uppercase
- Type the security password in lowercase
Restart your box
As in a great many laptop problems, the solution is sometimes incredibly simple. In truth, 80% of the laptop problems are solved by restarting the machine. We therefore advise you to restart your box and your Blackview A100. After that try to reconnect with your Blackview A100.
Check box settings
If non-e of the prior answers did work, the problem might be found to be on the box of your provider. It will consequently be necessary to go in the parameters of the box and to test if the system of key is in WPA / WPA2 . If this is not the circumstance, choose this option. After that try to connect your Blackview A100 again to Wifi. If the authentication issue carries on, we advise that you contact your service provider or a telephone retail store.
