Wiko View Go: Wifi Authentication Problem

At times, the Wiko View Go displays the Authentication Problem message when you try to connect to a Wi-Fi network. This sort of error message can possibly be caused by a lot of places. So, so that you can connect properly to the Wifi network with your Wiko View Go, we decided to write this tuto. So we will see together what to do and where to look to resolve this issue of Wifi authentication. We will see at 1st what you have to do on the Wiko View Go. At last, we will see what it can be necessary to do and check on your Wifi box.

What to do when the Wiko View Go has an authentication problem on the Wifi network

Forget the Wifi network on your Wiko View Go

Whenever the Wi-Fi network to which you want to connect has been changed since your last authentication, your Wiko View Go may display the text: Authentication or authentication error . Whenever the issue comes from there, the solution is fairly simple. Just forget about the Wifi network in your Wiko View Go. To accomplish this, go to the settings of the Wifi network and keep pressed on the network in question. You will after that have the option to choose the option: Forget this network . Once it’s done, you can try again to connect to the Wifi network. If the issue is not fixed, go to the next step.

Press the box button

Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it might happen to have a issue of authentication Wifi on the Wiko View Go because the box is not in Synchronization mode . If you want to activate the synchronization mode of your box, it can be incredibly simple. You should find a synchronization button to press. When this is done, a light will normally start blinking. You can actually after that try to reconnect to the Wifi network with your Wiko View Go. Whenever it still will not function, go to the next trick.

Retype Password

At times the authentication problem originates from the solution you type the Wifi network password. In fact, it can be sometimes subtle to type a password Wifi on its Wiko View Go. We for that reason advise you to try all the following possibilities:

  • Type the code without spaces or hyphens
  • Type the password in uppercase
  • Type the password in lowercase

Restart your box

As in lots of laptop problems, the solution is at times incredibly simple. In fact, 80% of the laptop problems are solved by restarting the machine. We therefore recommend you to restart your box and your Wiko View Go. After that try to reconnect with your Wiko View Go.

Check box settings

Whenever non-e of the previous answers did function, the problem may perhaps be found to be on the box of your provider. It will for that reason be necessary to go in the parameters of the box and to test in the event that the system of key is in WPA / WPA2 . Whenever this is not the case, choose this option. After that try to connect your Wiko View Go again to Wifi. Whenever the authentication issue carries on, we highly recommend that you contact your service provider or a telephone store.