Select Page

At times, the Wiko View 2 displays the Authentication Problem message when ever you try to connect to a Wi-Fi network. This kind of error message can possibly be caused by a lot of places. So, so that you can connect properly to the Wifi network with your Wiko View 2 , we decided to produce this tuto. So we will observe together what to do and where to look to solve this issue of Wifi authentication. We will see at initially what you have to do on the Wiko View 2 . Finally, we will see what it truly is important to do and check on your Wifi box.

What to do when the Wiko View 2 has an authentication problem on the Wifi network

Forget the Wifi network on your Wiko View 2

If the Wi-Fi network to which you desire to connect has been changed since your last authentication, your Wiko View 2 may display the text: Authentication or authentication error . If the trouble comes from there, the answer is fairly simple. Just forget about the Wifi network in your Wiko View 2 . To accomplish this, go to the settings of the Wifi network and keep pressed on the network in question. You will after that have the option to select the option: Forget this network . Once it’s completed, you can try again to connect to the Wifi network. In the event that the trouble is not fixed, go to the next section.

Press the box button

Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may possibly happen to have a trouble of authentication Wifi on the Wiko View 2 because the box is not in Synchronization mode . If you would like to activate the synchronization mode of your box, it truly is extremely basic. You should find a synchronization button to press. When ever this is completed, a light will most of the time start blinking. You can after that try to reconnect to the Wifi network with your Wiko View 2 . If it still does not work, go to the next trick.

Retype Password

At times the authentication problem originates from the way you type the Wifi network password. In fact, it truly is sometimes subtle to type a password Wifi on its Wiko View 2 . We for that reason advise you to try all the following possibilities:

  • Type the code without spaces or hyphens
  • Type the password in uppercase
  • Type the password in lowercase

Restart your box

As in lots of pc problems, the solution is occasionally extremely simple. In fact, 80% of the pc problems are solved by restarting the machine. We therefore recommend you to restart your box and your Wiko View 2 . Then try to reconnect with your Wiko View 2 .

Check box settings

If non-e of the previous answers did work, the problem could be found to be on the box of your provider. It will for that reason be important to go in the parameters of the box and to test in the event that the system of key is in WPA / WPA2 . If this is not the circumstance, select this option. Then try to connect your Wiko View 2 again to Wifi. If the authentication trouble carries on, we advise that you contact your service provider or a telephone retail store.