From time to time, the Wiko UPULSE displays the Authentication Problem message when ever you try to connect to a Wi-Fi network. This sort of error message can possibly originate from many places. So, so that you can actually connect properly to the Wifi network with your Wiko UPULSE, we decided to write this guide. So we will discover together what to do and where to look to solve this problem of Wifi authentication. We will see at initially what you have to do on the Wiko UPULSE. At last, we will see what it truly is necessary to do and check on your Wifi box.
How to proceed when the Wiko UPULSE has an authentication problem on the Wifi network
Forget the Wifi network on your Wiko UPULSE
If perhaps the Wi-Fi network to which you want to connect has been changed since your last authentication, your Wiko UPULSE may display the text message: Authentication or authentication error . If perhaps the trouble comes from there, the solution is very simple. Simply forget about the Wifi network in your Wiko UPULSE. To do this, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to select the option: Forget this network . Once it’s completed, you can actually try again to connect to the Wifi network. If the trouble is not solved, go to the next step.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may happen to have a trouble of authentication Wifi on the Wiko UPULSE because the box is not in Synchronization mode . If you would like to activate the synchronization mode of your box, it truly is very basic. You should find a synchronization button to press. When ever this is completed, a light will most of the time start blinking. You can then try to reconnect to the Wifi network with your Wiko UPULSE. If perhaps it still doesn’t work, go to the next trick.
Retype Password
From time to time the authentication problem originates from the method you type the Wifi network security password. In truth, it truly is sometimes subtle to type a security password Wifi on its Wiko UPULSE. We consequently advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the security password in uppercase
- Type the security password in lowercase
Restart your box
As in several computer problems, the solution is occasionally very simple. In truth, 80% of the computer problems are solved by restarting the machine. We therefore advise you to restart your box and your Wiko UPULSE. Then try to reconnect with your Wiko UPULSE.
Check box settings
If perhaps none of the prior answers did work, the problem might be found to be on the box of your provider. It will consequently be necessary to go in the parameters of the box and to test if perhaps the system of key is in WPA / WPA2 . If perhaps this is not the case, select this option. Then try to connect your Wiko UPULSE again to Wifi. If perhaps the authentication trouble continues, we recommend that you contact your service provider or a telephone store.
