Oftentimes, the Wiko Pulp Fab displays the Authentication Problem message when you try to connect to a Wi-Fi network. This sort of error message can possibly sourced from a lot of places. So, so that you may connect properly to the Wifi network with your Wiko Pulp Fab, we decided to write this tuto. So we will discover together what to do and where to look to solve this problem of Wifi authentication. We will see at first of all what you must do on the Wiko Pulp Fab. Finally, we will see what it is required to do and check on your Wifi box.
What to do when the Wiko Pulp Fab has an authentication problem on the Wifi network
Forget the Wifi network on your Wiko Pulp Fab
If perhaps the Wi-Fi network to which you want to connect has been changed since your last authentication, your Wiko Pulp Fab may display the text: Authentication or authentication error . If perhaps the issue comes from there, the answer is quite easy. Just forget about the Wifi network in your Wiko Pulp Fab. To accomplish this, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to select the option: Forget this network . When it’s carried out, you may try again to connect to the Wifi network. If the issue is not fixed, go to the next section.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it might happen to have a issue of authentication Wifi on the Wiko Pulp Fab because the box is not in Synchronization mode . If you wish to activate the synchronization mode of your box, it is extremely simple. You should find a synchronization button to press. When this is carried out, a light will most of the time start blinking. You may then try to reconnect to the Wifi network with your Wiko Pulp Fab. If perhaps it still doesn’t function, go to the next trick.
Retype Security password
Oftentimes the authentication problem originates from the solution you type the Wifi network password. In fact, it is sometimes subtle to type a password Wifi on its Wiko Pulp Fab. We consequently advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the password in uppercase
- Type the password in lowercase
Restart your box
As in a great many laptop problems, the solution is occasionally extremely simple. In fact, 80% of the laptop problems are solved by restarting the machine. We therefore recommend you to restart your box and your Wiko Pulp Fab. Then try to reconnect with your Wiko Pulp Fab.
Check box settings
If perhaps none of the prior answers did function, the problem may be found to be on the box of your provider. It will consequently be required to go in the parameters of the box and to check if perhaps the system of key is in WPA / WPA2 . If perhaps this is not the circumstance, select this option. Then try to connect your Wiko Pulp Fab again to Wifi. If perhaps the authentication issue remains, we advise that you contact your service provider or a telephone retail store.
