Wiko JERRY: Wifi Authentication Problem

Sometimes, the Wiko JERRY displays the Authentication Problem message when you try to connect to a Wi-Fi network. This sort of error message can possibly result from a lot of places. So, so that you can connect properly to the Wifi network with your Wiko JERRY, we decided to write this guide. So we will see together what to do and where to look to resolve this problem of Wifi authentication. We will see at initially what you must do on the Wiko JERRY. Finally, we will see what it’s important to do and check on your Wifi box.

What to do when the Wiko JERRY has an authentication problem on the Wifi network

Forget the Wifi network on your Wiko JERRY

In cases where the Wi-Fi network to which you wish to connect has been changed since your last authentication, your Wiko JERRY may display the text: Authentication or authentication error . In cases where the issue comes from there, the answer is quite simple. Just forget about the Wifi network in your Wiko JERRY. To accomplish this, go to the settings of the Wifi network and keep pressed on the network in question. You will after that have the option to select the option: Forget this network . When it’s carried out, you can try again to connect to the Wifi network. In the event that the issue is not solved, go to the next section.

Press the box button

Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it might happen to have a issue of authentication Wifi on the Wiko JERRY because the box is not in Synchronization mode . If you want to activate the synchronization mode of your box, it’s incredibly simple. You should find a synchronization button to press. When ever this is carried out, a light will most of the time start blinking. You can actually after that try to reconnect to the Wifi network with your Wiko JERRY. In cases where it still doesn’t function, go to the next trick.

Retype Security password

Sometimes the authentication problem originates from the solution you type the Wifi network security password. In fact, it’s sometimes subtle to type a security password Wifi on its Wiko JERRY. We therefore advise you to try all the following possibilities:

  • Type the code without spaces or hyphens
  • Type the security password in uppercase
  • Type the security password in lowercase

Restart your box

As in lots of laptop problems, the solution is at times incredibly simple. In fact, 80% of the laptop problems are solved by restarting the machine. We therefore recommend you to restart your box and your Wiko JERRY. After that try to reconnect with your Wiko JERRY.

Check box settings

In cases where non-e of the previous answers did function, the problem may perhaps be found to be on the box of your provider. It will therefore be important to go in the parameters of the box and to test whenever the system of key is in WPA / WPA2 . In cases where this is not the circumstance, select this option. After that try to connect your Wiko JERRY again to Wifi. In cases where the authentication issue remains, we highly recommend that you contact your service provider or a telephone retail store.