Wiko Bloom: Wifi Authentication Problem

Sometimes, the Wiko Bloom displays the Authentication Problem message when you try to connect to a Wi-Fi network. This kind of error message can possibly come from a lot of places. So, so that you’re able to connect properly to the Wifi network with your Wiko Bloom, we decided to write this guide. So we will find out together what to do and where to look to resolve this issue of Wifi authentication. We will see at 1st what you must do on the Wiko Bloom. Finally, we will see what it’s necessary to do and check on your Wifi box.

What to do when the Wiko Bloom has an authentication problem on the Wifi network

Forget the Wifi network on your Wiko Bloom

Whenever the Wi-Fi network to which you want to connect has been changed since your last authentication, your Wiko Bloom may display the text: Authentication or authentication error . Whenever the trouble comes from there, the solution is quite easy. Just forget about the Wifi network in your Wiko Bloom. To do this, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to select the option: Forget this network . When it’s completed, you’re able to try again to connect to the Wifi network. In the event that the trouble is not resolved, go to the next step.

Press the box button

Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it might happen to have a trouble of authentication Wifi on the Wiko Bloom because the box is not in Synchronization mode . If you wish to activate the synchronization mode of your box, it’s extremely simple. You should find a synchronization button to press. When this is completed, a light will most of the time start blinking. You can then try to reconnect to the Wifi network with your Wiko Bloom. Whenever it still doesn’t work, go to the next trick.

Retype Password

Sometimes the authentication problem comes from the method you type the Wifi network security password. Certainly, it’s sometimes subtle to type a security password Wifi on its Wiko Bloom. We consequently advise you to try all the following possibilities:

  • Type the code without spaces or hyphens
  • Type the security password in uppercase
  • Type the security password in lowercase

Restart your box

As in several computer problems, the solution is sometimes extremely simple. Certainly, 80% of the computer problems are solved by restarting the machine. We therefore advise you to restart your box and your Wiko Bloom. Then try to reconnect with your Wiko Bloom.

Check box settings

Whenever non-e of the previous solutions did work, the problem may be found to be on the box of your provider. It will consequently be necessary to go in the parameters of the box and to check if the system of key is in WPA / WPA2 . Whenever this is not the circumstance, select this option. Then try to connect your Wiko Bloom again to Wifi. Whenever the authentication trouble carries on, we highly recommend that you contact your service provider or a telephone store.