Wiko Birdy: Wifi Authentication Problem

Oftentimes, the Wiko Birdy displays the Authentication Problem message when ever you try to connect to a Wi-Fi network. This sort of error message can possibly be caused by a lot of places. So, so that you may connect properly to the Wifi network with your Wiko Birdy, we decided to produce this guide. So we will discover together what to do and where to look to resolve this issue of Wifi authentication. We will see at first of all what you have to do on the Wiko Birdy. Finally, we will see what it is actually important to do and check on your Wifi box.

What to do when the Wiko Birdy has an authentication problem on the Wifi network

Forget the Wifi network on your Wiko Birdy

If the Wi-Fi network to which you wish to connect has been changed since your last authentication, your Wiko Birdy may display the text message: Authentication or authentication error . If the problem comes from there, the answer is quite simple. Simply forget about the Wifi network in your Wiko Birdy. To do this, go to the settings of the Wifi network and keep pressed on the network in question. You will after that have the option to choose the option: Forget this network . Once it’s done, you may try again to connect to the Wifi network. If perhaps the problem is not resolved, go to the next section.

Press the box button

Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it might happen to have a problem of authentication Wifi on the Wiko Birdy because the box is not in Synchronization mode . If you would like to activate the synchronization mode of your box, it is actually extremely basic. You should find a synchronization button to press. When this is done, a light will normally start blinking. You’re able to after that try to reconnect to the Wifi network with your Wiko Birdy. If it still doesn’t function, go to the next trick.

Retype Security password

Oftentimes the authentication problem comes from the technique you type the Wifi network security password. In fact, it is actually sometimes subtle to type a security password Wifi on its Wiko Birdy. We for that reason advise you to try all the following possibilities:

  • Type the code without spaces or hyphens
  • Type the security password in uppercase
  • Type the security password in lowercase

Restart your box

As in lots of pc problems, the solution is at times extremely simple. In fact, 80% of the pc problems are solved by restarting the machine. We therefore recommend you to restart your box and your Wiko Birdy. Then try to reconnect with your Wiko Birdy.

Check box settings

If non-e of the prior answers did function, the problem could possibly be found to be on the box of your provider. It will for that reason be important to go in the parameters of the box and to test in the event that the system of key is in WPA / WPA2 . If this is not the case, choose this option. Then try to connect your Wiko Birdy again to Wifi. If the authentication problem persists, we suggest that you contact your service provider or a telephone retail store.