The Wiko Lenny 3 screen wont turn on anymore

It may happen that we need to use his Wiko Lenny 3 and the screen does not turn on anymore. When ever this happens, it can be incredibly frustrating because without a screen, the Wiko Lenny 3 is unusable. So that is the sort of problem that needs to be resolved fairly quickly. But do not get worried, the fact that the Wiko Lenny 3 screen will not work, does not necessarily imply that you have to replace it. To help you and to fix your screen, we decided to write this article. We will first see what you need to control if the screen of your Wiko Lenny 3 will not work anymore. We will see secondly what could be the causes of this problem.screen-wont-turn-on-Wiko-Lenny-3

How to proceed in cases where your Wiko Lenny 3 screen wont switch on

Here below are the steps we recommend you to do to fix the screen of your Wiko Lenny 3.

Make sure your Wiko Lenny 3 is fully charged

Yes, we know it’s stupid, but it often happens that this is the origin of the problem. We advise you to check that your Wiko Lenny 3 is well loaded. Indeed, it in some cases happens that a mobile is discharged at once, without being seen coming. So, also if you’re sure your Wiko Lenny 3 was loaded before the screen goes off, you need to set it on & nbsp; load. If the screen still will not work, go to the next step.

Make a forced restart of the Wiko Lenny 3

Sometimes it takes a forced start to your Wiko Lenny 3 for the screen to work. If you wish to do a forced restart, you must do 1 of the following two maneuvers:

  • Staying long on the Power button .
  • Hold down the Power button and the Volume Down button for 7 seconds.

Once it is actually done, your Wiko Lenny 3 will restart. You will have the capacity to see in cases where the screen starts walking again or not. If it is not, go to the next step.

Make sure the Wiko Lenny 3 screen does not turn on

It can be necessary to understand if it is the Wiko Lenny 3 screen that will not work anymore. Indeed, it can be even likely that the issue comes on the other hand. To be able to verify in cases where the screen is dysfunctional, we invite you to restart your Wiko Lenny 3. When ever it starts, you must feel a vibration, hear a noise or the led Wiko Lenny 3 should come on. If you notice 1 of these three situations, it proves that the Wiko Lenny 3 is started and that the screen does not work. If you do not see any of these situations, it indicates that the problem will not necessarily come from the screen.

Change the Wiko Lenny 3 screen

If perhaps the previous step allowed you to confirm that it is the Wiko Lenny 3 screen that will not work, it indicates that it can be a hardware problem. In this case, it will unfortunately be required to modify the Wiko Lenny 3 screen. For this, we advise you to go to a specialized shop.

What can cause a screen that will not switch on a Wiko Lenny 3

There could be a multitude of causes that could cause a screen that no longer lights up. Here below are diverse possibilities.

Wiko Lenny 3 took water or moisture?

It often happens that this is the cause of a screen that works badly. If perhaps the Wiko Lenny 3 took the water or in case you found yourself in a very wet environment recently, the problem is coming from there. If that is the case, you can try warming your Wiko Lenny 3 with a dryer and pressing hard on the top of the screen. This can in some cases repair the screen.

Has the Wiko Lenny 3 fallen?

If perhaps your Wiko Lenny 3 has fallen recently, or in the event that the screen is cracked, it can be likely that the problem comes from there. We advise you to go to the store to replace the screen.

Have there been other signs

If perhaps your Wiko Lenny 3 has been executing weird things lately, this may have been a sign of a problem with the OS. Indeed, if your Wiko Lenny 3 goes off by itself, whether it restarts alone or other odd things, it’s that there is small problem with the OS. In this case, we suggest you to make a Factory Reset.