The Acer Liquid M330 screen wont turn on anymore

It may happen that we need to use his Acer Liquid M330 and the screen does not turn on anymore. Once this happens, it is actually incredibly irritating because without a screen, the Acer Liquid M330 is unusable. So that’s the sort of trouble that needs to be solved fairly quickly. But do not get worried, the fact that the Acer Liquid M330 screen doesn’t function, does not necessarily imply that you have to replace it. To help you and to fix your screen, we decided to write this article. We will see at first what you need to control if the screen of your Acer Liquid M330 doesn’t function anymore. We will see in a second time what might be the causes of this trouble.screen-wont-turn-on-acer-liquid-m330

What to do if perhaps your Acer Liquid M330 screen wont turn on

Here below are the steps we advise you to do to repair the screen of your Acer Liquid M330.

Be certain your Acer Liquid M330 is fully charged

Yes, we know it’s stupid, nevertheless it often happens that this is the origin of the trouble. We advise you to test that your Acer Liquid M330 is well loaded. Actually, it from time to time happens that a phone is discharged at when, without being seen coming. So, even if you’re sure your Acer Liquid M330 was loaded before the screen goes off, you will have to put it on & nbsp; load. If the screen still doesn’t function, go to the next step.

Make a forced restart of the Acer Liquid M330

Sometimes it takes a forced start to your Acer Liquid M330 for the screen to function. If you wish to do a forced restart, you have to do one of the following two maneuvers:

  • Staying long on the Power button .
  • Hold down the Power button and the Volume Down button for 7 seconds.

Once it is actually done, your Acer Liquid M330 will restart. You are going to have the capacity to see if perhaps the screen starts walking again or not. If it is not, go to the next section.

Be certain the Acer Liquid M330 screen does not turn on

It is crucial to find out if it is the Acer Liquid M330 screen that doesn’t work anymore. Indeed, it is actually even possible that the issue comes on the other hand. In order to check if perhaps the screen is dysfunctional, we invite you to restart your Acer Liquid M330. Once it starts, you should feel a vibration, hear a noise or the led Acer Liquid M330 should come on. If you notice one of these three circumstances, it proves that the Acer Liquid M330 is started and that the screen does not function. If you do not see any of these situations, it indicates that the trouble doesn’t necessarily be caused by the screen.

Change the Acer Liquid M330 screen

In the event that the prior step allowed you to confirm that it is the Acer Liquid M330 screen that doesn’t work, it indicates that it is actually a hardware trouble. In this case, it will unfortunately be necessary to modify the Acer Liquid M330 screen. For this, we advise you to go to a specific shop.

What may induce a screen that doesn’t turn on a Acer Liquid M330

There might be a multitude of causes that could induce a screen that no longer lights up. Here below are different possibilities.

Acer Liquid M330 took water or moisture?

It often happens that this is the induce of a screen that works badly. In the event that the Acer Liquid M330 took the water or in case you found yourself in a really wet environment recently, the problem is coming from there. If that is the case, you can try warming your Acer Liquid M330 with a dryer and pressing hard on the top of the screen. This can from time to time repair the screen.

Has the Acer Liquid M330 fallen?

In the event that your Acer Liquid M330 has fallen recently, or if the screen is cracked, it is actually likely that the trouble comes from there. We advise you to go to the retail store to replace the screen.

Have there been other signs

In the event that your Acer Liquid M330 has been doing weird stuff lately, this may have been a sign of a trouble with the OS. Actually, if your Acer Liquid M330 goes off by itself, whether it restarts alone or other odd stuff, it is that there is little trouble with the OS. In this case, we recommend you to make a Factory Reset.