Sharing the web connection of ZTE Blade A610 in wifi is an incredibly convenient feature on the ZTE Blade A610. Certainly, putting the ZTE Blade A610 in modem mode makes it possible to share the connection of the mobile phone with your entourage or with your different devices. So, in the event you dont have a suitable Wifi access where you stand, we will observe in the following paragraphs the technique to transform the ZTE Blade A610 into a wifi hotspot. We will 1st discover the technique to turn on and configure connection sharing. We will discover in a secondary section what is the connection sharing and what it implies for the ZTE Blade A610.
The method to share the ZTE Blade A610 connection
To turn your ZTE Blade A610 into a Wi-Fi hotspot, it’s extremely simple. Certainly, it is actually only necessary to carry out two steps. The first of all is to enable connection sharing and the secondary is to set up the network. All you have to do is stick to the two steps below.
Enable Net Connection Sharing on ZTE Blade A610
To share your ZTE Blade A610 net connection, you will 1st have to enable connection sharing. To achieve this, go to the ZTE Blade A610 Settings menu . When you’re there, you need to go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have 3 options available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when the ZTE Blade A610 is connected to a laptop
- Share by using mobile phone bluetooth
If you have made your decision, you just have to test to activate the sharing of the ZTE Blade A610 connection. When it is active, you should discover a little icon appear in the notifications bar.
Configure Wifi connection sharing on ZTE Blade A610
At this point that you’ve set your ZTE Blade A610 in modem mode, you’ll have to set up the network so other devices can connect. Just those who have chosen Wi-Fi sharing are affected by the configuration. To set up, click Via Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. When you are on this page, youre able to change the password to connect to the ZTE Blade A610 network. So, enter the password which you have chosen and validate. At last, youre able to also modify the network name in the event you wish.
Connect to the ZTE Blade A610 network
At this point that the network is configured, youre able to connect to it with other devices. To achieve this, you just simply have to bring your device and look for the ZTE Blade A610 network among the available WIFI networks. If you have found it, you can log in using the password that you designed. And there you have a good net connection!
What is Connection Sharing on a ZTE Blade A610
To make it basic, sharing a connection means sharing the 3G or 4G connection of the ZTE Blade A610 with other devices. So it’s ideal when you do not have a WiFi connection but you have 3G or 4G network on your ZTE Blade A610. This enables you to have a drinking connection almost everywhere. Warning: Realize that ZTE Blade A610’s connection share uses mobile data. This implies that the web usage you are using is deducted from your portable plan. So, it will be possible to configure a limit on the consumption of mobile data. So, after a certain limit, the ZTE Blade A610 hotspot wifi turn off.
