Setting up HotSpot or Tethering on Zopo

Sharing the net connection of Zopo in wifi is an incredibly handy feature on the Zopo. In truth, putting the Zopo in modem mode makes it possible to share the connection of the mobile with your entourage or with your other devices. So, in the event you don’t have a suitable Wifi access where you are, we will discover in the following paragraphs the method to convert the Zopo into a wifi hotspot. We will 1st discover the method to enable and configure connection sharing. We will discover in a secondary section what is the connection sharing and what it implies for the Zopo.Tethering-HotSpot-Zopo

Tips on how to share the Zopo connection

To turn your Zopo into a Wi-Fi hotspot, it’s extremely basic. In truth, it is simply required to carry out two steps. The initially is to enable connection sharing and the secondary is to configure the network. All you should do is stick to the two steps below.

Enable Internet Connection Sharing on Zopo

To share your Zopo net connection, you’ll 1st have to enable connection sharing. To accomplish this, go to the Zopo Settings menu . When you’re there, you must go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have 3 choices available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when the Zopo is connected to a computer
  • Share via mobile phone bluetooth

If you have made your choice, you just have to test to activate the sharing of the Zopo connection. When ever it is active, you should discover a little icon appear in the notifications bar.

Set up Wifi connection sharing on Zopo

At this point that you have set your Zopo in modem mode, you’ll have to set up the network so other devices can connect. Simply those who have opted for Wi-Fi sharing are affected by the configuration. To configure, click Via Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you’re able to change the password to connect to the Zopo network. So, enter the password of your choice and confirm. Finally, you’re able to also change the network name in the event you wish.

Connect to the Zopo network

At this point that the network is configured, you’re able to connect to it with other devices. To accomplish this, you just simply have to bring your system and look for the Zopo network among the available WIFI networks. If you have found it, you can log in using the password that you configured. And there you have a decent net connection!

What is Connection Sharing on a Zopo

To make it basic, sharing a connection means sharing the 3G or 4G connection of the Zopo with other devices. So it is ideal when you do not have a WiFi connection but you have 3G or 4G network on your Zopo. This enables you to have a good connection almost everywhere. Warning: Note that Zopo’s connection share uses mobile data. It indicates that the net usage you are using is deducted from your téléphone plan. So, it is possible to configure a limit on the consumption of mobile data. So, after a certain limit, the Zopo hotspot wifi turn off.