Sharing the net connection of Zopo Flash in wifi is an extremely convenient feature on the Zopo Flash. Certainly, putting the Zopo Flash in modem mode makes it possible to share the connection of the telephone with your entourage or with your different devices. So, if you dont have a suitable Wifi access where you are, we will see outlined in this article the method to transform the Zopo Flash into a wifi hotspot. We will initially find out the method to enable and configure connection sharing. We will find out in a secondary step what is the connection sharing and what it implies for the Zopo Flash.
How to share the Zopo Flash connection
To turn your Zopo Flash into a Wi-Fi hotspot, it’s very simple. Certainly, it is actually just necessary to accomplish 2 steps. The first is to enable connection sharing and the secondary is to configure the network. All you must do is stick to the 2 steps below.
Enable Internet Connection Sharing on Zopo Flash
To share your Zopo Flash internet connection, you’ll first need to enable connection sharing. To achieve this, go to the Zopo Flash Settings menu . When you’re there, you have to go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have 3 options available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when the Zopo Flash is connected to a pc
- Share by using cellphone bluetooth
If you have made your decision, you just have to check to activate the sharing of the Zopo Flash connection. When it is active, you should find out a little icon appear in the notifications bar.
Set up Wifi connection sharing on Zopo Flash
At this point that you’ve set your Zopo Flash in modem mode, you’ll need to set up the network so other devices may connect. Simply those who have opted for Wi-Fi sharing are affected by the setup. To configure, click Via Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you may change the password to connect to the Zopo Flash network. So, enter the security password of your choice and confirm. At last, you may also modify the network name if you wish.
Connect to the Zopo Flash network
At this point that the network is configured, you may connect to it with other devices. To achieve this, you just need to bring your system and look for the Zopo Flash network among the available WIFI networks. If you have found it, you can log in using the password that you designed. And there you have a good internet connection!
What is Connection Sharing on a Zopo Flash
To make it basic, sharing a connection means sharing the 3G or 4G connection of the Zopo Flash with other devices. So it is ideal when you do not have a WiFi connection but you have 3G or 4G network on your Zopo Flash. This allows you to have a good connection almost everywhere. Warning: Realize that Zopo Flash’s connection share uses mobile data. This means that the net usage you are using is deducted from your mobile plan. Thus, it’s possible to configure a limit on the consumption of mobile data. Thus, after a certain limit, the Zopo Flash hotspot wifi cuts.
