Setting up HotSpot or Tethering on Zopo Color F2

Sharing the web connection of Zopo Color F2 in wifi is a very convenient feature on the Zopo Color F2. Indeed, putting the Zopo Color F2 in modem mode can help you to share the connection of the phone with your entourage or with your different devices. So, if you don’t have a suitable Wifi access where you stand, we will observe in the following paragraphs the right way to convert the Zopo Color F2 into a wifi hotspot. We will initially see the right way to turn on and configure connection sharing. We will see in a secondary section what is the connection sharing and what it signifies for the Zopo Color F2.Tethering-HotSpot-Zopo-Color-F2

The method to share the Zopo Color F2 connection

To turn your Zopo Color F2 into a Wi-Fi hotspot, it’s incredibly simple. Indeed, it can be only required to perform two steps. The initially is to enable connection sharing and the secondary is to set up the network. All you should do is follow the two steps below.

Enable Internet Connection Sharing on Zopo Color F2

To share your Zopo Color F2 net connection, you’ll first need to enable connection sharing. To do this, go to the Zopo Color F2 Settings menu . When you’re there, you have to go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have 3 options available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when the Zopo Color F2 is connected to a pc
  • Share through phone bluetooth

When you have made your choice, you just have to test to activate the sharing of the Zopo Color F2 connection. When ever it is active, you should see a small icon appear in the notifications bar.

Configure Wifi connection sharing on Zopo Color F2

At this point that you’ve set your Zopo Color F2 in modem mode, you’ll need to set up the network so other devices may connect. Only those who have chosen Wi-Fi sharing are affected by the setup. To set up, click Through Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you may change the password to connect to the Zopo Color F2 network. So, enter the password of your choice and confirm. At last, you may also modify the network name if you wish.

Connect to the Zopo Color F2 network

At this point that the network is configured, you may connect to it with other devices. To do this, you simply need to bring your system and look for the Zopo Color F2 network among the available WIFI networks. When you have found it, you can log in using the password that you configured. And there you have a decent net connection!

What is Connection Sharing on a Zopo Color F2

To make it basic, sharing a connection means sharing the 3G or 4G connection of the Zopo Color F2 with other devices. So it’s ideal when you don’t have a WiFi connection but you have 3G or 4G network on your Zopo Color F2. This enables you to have a good connection almost everywhere. Warning: Realize that Zopo Color F2’s connection share uses mobile data. This implies that the web usage you are using is deducted from your téléphone plan. Thus, it will be possible to configure a limit on the consumption of mobile data. Thus, after a specific limit, the Zopo Color F2 hotspot wifi cuts.