Setting up HotSpot or Tethering on Wileyfox Spark

Sharing the web connection of Wileyfox Spark in wifi is a very convenient feature on the Wileyfox Spark. In fact, putting the Wileyfox Spark in modem mode makes it possible to share the connection of the telephone with your entourage or with your other devices. So, in the event you don’t have a suitable Wifi access where you are, we will discover in the following paragraphs how you can convert the Wileyfox Spark into a wifi hotspot. We will 1st observe how you can turn on and configure connection sharing. We will observe in a secondary step what is the connection sharing and what it signifies for the Wileyfox Spark.Tethering-HotSpot-Wileyfox Spark

The right way to share the Wileyfox Spark connection

To turn your Wileyfox Spark into a Wi-Fi hotspot, it’s incredibly basic. In fact, it is actually just necessary to accomplish two steps. The first is to enable connection sharing and the secondary is to set up the network. All you need to do is follow the two steps below.

Enable Net Connection Sharing on Wileyfox Spark

To share your Wileyfox Spark internet connection, you’ll first need to enable connection sharing. To get this done, go to the Wileyfox Spark Settings menu . Once you’re there, you need to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have three choices available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when ever the Wileyfox Spark is connected to a laptop
  • Share by using mobile phone bluetooth

When you have made your decision, you just have to check to activate the sharing of the Wileyfox Spark connection. When it is active, you should observe a tiny icon show up in the notifications bar.

Set up Wifi connection sharing on Wileyfox Spark

At this point that you have set your Wileyfox Spark in modem mode, you’ll need to set up the network so other devices may connect. Simply those who have opted for Wi-Fi sharing are affected by the configuration. To set up, click Via Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, you can change the password to connect to the Wileyfox Spark network. So, enter the password of your choice and validate. At last, you can also change the network name in the event you wish.

Connect to the Wileyfox Spark network

At this point that the network is configured, you can connect to it with other devices. To get this done, you simply need to bring your device and look for the Wileyfox Spark network among the available WIFI networks. When you have found it, you can sign in using the password that you configured. And there you have a great internet connection!

What is Connection Sharing on a Wileyfox Spark

To make it simple, sharing a connection means sharing the 3G or 4G connection of the Wileyfox Spark with other devices. So it’s ideal when ever you do not have a WiFi connection but you have 3G or 4G network on your Wileyfox Spark. This permits you to have a good connection almost everywhere. Warning: Realize that Wileyfox Spark’s connection share uses mobile data. This means that the web usage you are using is deducted from your portable plan. Thus, it is possible to configure a limit on the consumption of mobile data. Thus, after a specific limit, the Wileyfox Spark hotspot wifi cuts.