Setting up HotSpot or Tethering on Wiko View 2

Sharing the internet connection of Wiko View 2 in wifi is an extremely practical feature on the Wiko View 2 . Indeed, putting the Wiko View 2 in modem mode makes it possible to share the connection of the smartphone with your entourage or with your different devices. So, in case you do not have a suitable Wifi access where you are, we will observe in this post the right way to transform the Wiko View 2 into a wifi hotspot. We will 1st see the right way to enable and configure connection sharing. We will see in a secondary step what is the connection sharing and what it implies for the Wiko View 2 .Tethering-HotSpot-Wiko View 2

How you can share the Wiko View 2 connection

To turn your Wiko View 2 into a Wi-Fi hotspot, it’s extremely basic. Indeed, it’s just required to carry out 2 steps. The first of all is to enable connection sharing and the secondary is to configure the network. All you have to do is stick to the 2 steps below.

Enable Internet Connection Sharing on Wiko View 2

To share your Wiko View 2 internet connection, you will first need to enable connection sharing. To get this done, go to the Wiko View 2 Settings menu . When you’re there, you must go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have three options available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when the Wiko View 2 is connected to a computer
  • Share by using mobile phone bluetooth

When you have made your choice, you just have to check to activate the sharing of the Wiko View 2 connection. When ever it is active, you should see a little icon appear in the notifications bar.

Configure Wifi connection sharing on Wiko View 2

Now that you have set your Wiko View 2 in modem mode, you’ll need to set up the network so other devices may connect. Just those who have opted for Wi-Fi sharing are affected by the configuration. To configure, click Via Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you may change the password to connect to the Wiko View 2 network. So, enter the security password which you have chosen and confirm. Finally, you may also change the network name in case you wish.

Connect to the Wiko View 2 network

Now that the network is configured, you may connect to it with other devices. To get this done, you simply need to bring your system and look for the Wiko View 2 network among the available WIFI networks. When you have found it, you can sign in using the password that you designed. And there you have a good internet connection!

What is Connection Sharing on a Wiko View 2

To make it basic, sharing a connection means sharing the 3G or 4G connection of the Wiko View 2 with other devices. So it is ideal when you do not have a WiFi connection but you have 3G or 4G network on your Wiko View 2 . This permits you to have a drinking connection almost everywhere. Warning: Realize that Wiko View 2 ‘s connection share uses mobile data. This implies that the internet usage you are using is deducted from your mobile plan. Thus, it will be possible to configure a limit on the consumption of mobile data. Thus, after a specific limit, the Wiko View 2 hotspot wifi turn off.