Sharing the net connection of Wiko Pulp Fab in wifi is a very practical feature on the Wiko Pulp Fab. In truth, putting the Wiko Pulp Fab in modem mode makes it possible to share the connection of the smartphone with your entourage or with your other devices. So, in the event you do not have a suitable Wifi access where you are, we will discover on this page how to transform the Wiko Pulp Fab into a wifi hotspot. We will initially see how to turn on and configure connection sharing. We will see in a second section what is the connection sharing and what it implies for the Wiko Pulp Fab.
The technique to share the Wiko Pulp Fab connection
To turn your Wiko Pulp Fab into a Wi-Fi hotspot, it’s very straightforward. In truth, it is actually simply necessary to carry out two steps. The first of all is to enable connection sharing and the second is to set up the network. All you need to do is follow the two steps below.
Enable Internet Connection Sharing on Wiko Pulp Fab
To share your Wiko Pulp Fab net connection, you will 1st need to enable connection sharing. To do this, go to the Wiko Pulp Fab Settings menu . When you’re there, you have to go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have three options available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when ever the Wiko Pulp Fab is connected to a computer
- Share by using phone bluetooth
If you have made your choice, you just have to check to activate the sharing of the Wiko Pulp Fab connection. When ever it is active, you should see a small icon appear in the notifications bar.
Set up Wifi connection sharing on Wiko Pulp Fab
At this point that you have set your Wiko Pulp Fab in modem mode, you’ll need to set up the network so other devices can connect. Simply those who have chosen Wi-Fi sharing are affected by the setup. To set up, click Through Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. When you are on this page, youre able to change the password to connect to the Wiko Pulp Fab network. So, enter the password which you have chosen and validate. At last, youre able to also modify the network name in the event you wish.
Connect to the Wiko Pulp Fab network
At this point that the network is configured, youre able to connect to it with other devices. To do this, you just need to bring your system and look for the Wiko Pulp Fab network among the available WIFI networks. If you have found it, you can log in using the password that you designed. And there you have a great net connection!
What is Connection Sharing on a Wiko Pulp Fab
To make it simple, sharing a connection means sharing the 3G or 4G connection of the Wiko Pulp Fab with other devices. So it’s ideal when ever you don’t have a WiFi connection but you have 3G or 4G network on your Wiko Pulp Fab. This enables you to have a drinking connection almost everywhere. Warning: Realize that Wiko Pulp Fab’s connection share uses mobile data. This implies that the net usage you are using is deducted from your smartphone plan. So, it is possible to configure a limit on the consumption of mobile data. So, after a certain limit, the Wiko Pulp Fab hotspot wifi cuts.
