Sharing the internet connection of Wiko Cink Peax 2 in wifi is an extremely practical feature on the Wiko Cink Peax 2. Certainly, putting the Wiko Cink Peax 2 in modem mode makes it possible to share the connection of the smartphone with your entourage or with your different devices. So, in the event you dont have a suitable Wifi access where you are, we will see in this post the right way to transform the Wiko Cink Peax 2 into a wifi hotspot. We will 1st observe the right way to enable and configure connection sharing. We will observe in a secondary step what is the connection sharing and what it implies for the Wiko Cink Peax 2.
The right way to share the Wiko Cink Peax 2 connection
To turn your Wiko Cink Peax 2 into a Wi-Fi hotspot, it’s incredibly straightforward. Certainly, it can be simply required to perform two steps. The first of all is to enable connection sharing and the secondary is to set up the network. All you have to do is follow the two steps below.
Enable Net Connection Sharing on Wiko Cink Peax 2
To share your Wiko Cink Peax 2 internet connection, you will first have to enable connection sharing. To get this done, go to the Wiko Cink Peax 2 Settings menu . When you’re there, you have to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have three options available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when ever the Wiko Cink Peax 2 is connected to a personal pc
- Share by using mobile phone bluetooth
If you have made your choice, you just have to check to activate the sharing of the Wiko Cink Peax 2 connection. When it is active, you should observe a little icon show up in the notifications bar.
Set up Wifi connection sharing on Wiko Cink Peax 2
At this point that you’ve set your Wiko Cink Peax 2 in modem mode, you’ll have to set up the network so other devices may connect. Just those who have opted for Wi-Fi sharing are affected by the configuration. To set up, click Through Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you can actually change the password to connect to the Wiko Cink Peax 2 network. So, enter the security password of your choice and validate. Finally, you can actually also change the network name in the event you wish.
Connect to the Wiko Cink Peax 2 network
At this point that the network is configured, you can actually connect to it with other devices. To get this done, you just have to bring your device and look for the Wiko Cink Peax 2 network among the available WIFI networks. If you have found it, you can log in using the password that you designed. And there you have a great internet connection!
What is Connection Sharing on a Wiko Cink Peax 2
To make it simple, sharing a connection means sharing the 3G or 4G connection of the Wiko Cink Peax 2 with other devices. So it is ideal when ever you don’t have a WiFi connection but you have 3G or 4G network on your Wiko Cink Peax 2. This enables you to have a good connection almost everywhere. Warning: Remember that Wiko Cink Peax 2’s connection share uses mobile data. This implies that the internet usage you are using is deducted from your mobile plan. Thus, it is possible to configure a limit on the consumption of mobile data. Thus, after a specific limit, the Wiko Cink Peax 2 hotspot wifi turn off.
