Setting up HotSpot or Tethering on Samsung Galaxy Tab 4

Sharing the net connection of Samsung Galaxy Tab 4 in wifi is a very practical feature on the Samsung Galaxy Tab 4. Certainly, putting the Samsung Galaxy Tab 4 in modem mode afford them the ability to share the connection of the cellphone with your entourage or with your other devices. So, if you do not have a suitable Wifi access where you stand, we will observe outlined in this article tips on how to convert the Samsung Galaxy Tab 4 into a wifi hotspot. We will first find out tips on how to turn on and configure connection sharing. We will find out in a secondary section what is the connection sharing and what it implies for the Samsung Galaxy Tab 4.Tethering-HotSpot-Samsung Galaxy Tab 4

The method to share the Samsung Galaxy Tab 4 connection

To turn your Samsung Galaxy Tab 4 into a Wi-Fi hotspot, it’s very straightforward. Certainly, it is actually only necessary to execute 2 steps. The 1st is to enable connection sharing and the secondary is to set up the network. All you have to do is stick to the 2 steps below.

Enable Net Connection Sharing on Samsung Galaxy Tab 4

To share your Samsung Galaxy Tab 4 internet connection, you will 1st need to enable connection sharing. To get this done, go to the Samsung Galaxy Tab 4 Settings menu . Once you’re there, you must go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have 3 choices available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when the Samsung Galaxy Tab 4 is connected to a personal pc
  • Share through mobile phone bluetooth

When you have made your choice, you just have to check to activate the sharing of the Samsung Galaxy Tab 4 connection. When it is active, you should find out a tiny icon show up in the notifications bar.

Configure Wifi connection sharing on Samsung Galaxy Tab 4

At this point that you have set your Samsung Galaxy Tab 4 in modem mode, you’ll need to set up the network so other devices may connect. Simply those who have opted for Wi-Fi sharing are affected by the setup. To set up, click Through Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, you can change the password to connect to the Samsung Galaxy Tab 4 network. So, enter the security password which you have chosen and confirm. Finally, you can also change the network name if you wish.

Connect to the Samsung Galaxy Tab 4 network

At this point that the network is configured, you can connect to it with other devices. To get this done, you just need to bring your device and look for the Samsung Galaxy Tab 4 network among the available WIFI networks. When you have found it, you can sign in using the password that you configured. And there you have a good internet connection!

What is Connection Sharing on a Samsung Galaxy Tab 4

To make it basic, sharing a connection means sharing the 3G or 4G connection of the Samsung Galaxy Tab 4 with other devices. So it is ideal when you don’t have a WiFi connection but you have 3G or 4G network on your Samsung Galaxy Tab 4. This permits you to have a good connection almost everywhere. Warning: Note that Samsung Galaxy Tab 4’s connection share uses mobile data. It indicates that the net usage you are using is deducted from your smartphone plan. Thus, it’s possible to configure a limit on the consumption of mobile data. Thus, after a specific limit, the Samsung Galaxy Tab 4 hotspot wifi turn off.