Setting up HotSpot or Tethering on Polaroid Ruby Pro V463

Sharing the net connection of Polaroid Ruby Pro V463 in wifi is an extremely convenient feature on the Polaroid Ruby Pro V463. Certainly, putting the Polaroid Ruby Pro V463 in modem mode makes it possible to share the connection of the mobile phone with your entourage or with your different devices. So, in case you do not have a suitable Wifi access where you stand, we will see in this article the right way to convert the Polaroid Ruby Pro V463 into a wifi hotspot. We will first discover the right way to enable and configure connection sharing. We will discover in a secondary section what is the connection sharing and what it signifies for the Polaroid Ruby Pro V463.Tethering-HotSpot-Polaroid-Ruby-Pro-V463

The technique to share the Polaroid Ruby Pro V463 connection

To turn your Polaroid Ruby Pro V463 into a Wi-Fi hotspot, it’s extremely simple. Certainly, it is simply necessary to execute two steps. The first of all is to enable connection sharing and the secondary is to configure the network. All you have to do is follow the two steps below.

Enable Net Connection Sharing on Polaroid Ruby Pro V463

To share your Polaroid Ruby Pro V463 net connection, you’ll 1st need to enable connection sharing. To achieve this, go to the Polaroid Ruby Pro V463 Settings menu . When you’re there, you need to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have three choices available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when the Polaroid Ruby Pro V463 is connected to a personal pc
  • Share via cellphone bluetooth

If you have made your decision, you just have to test to activate the sharing of the Polaroid Ruby Pro V463 connection. When it is active, you should discover a tiny icon show up in the notifications bar.

Configure Wifi connection sharing on Polaroid Ruby Pro V463

Now that you have set your Polaroid Ruby Pro V463 in modem mode, you’ll need to set up the network so other devices can connect. Only those who have opted for Wi-Fi sharing are affected by the setup. To configure, click Via Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you may change the password to connect to the Polaroid Ruby Pro V463 network. So, enter the password which you have chosen and confirm. At last, you may also change the network name in case you wish.

Connect to the Polaroid Ruby Pro V463 network

Now that the network is configured, you may connect to it with other devices. To achieve this, you simply need to bring your device and look for the Polaroid Ruby Pro V463 network among the available WIFI networks. If you have found it, you can sign in using the password that you designed. And there you have a decent net connection!

What is Connection Sharing on a Polaroid Ruby Pro V463

To make it simple, sharing a connection means sharing the 3G or 4G connection of the Polaroid Ruby Pro V463 with other devices. So it’s ideal when you will not have a WiFi connection but you have 3G or 4G network on your Polaroid Ruby Pro V463. This allows you to have a good connection almost everywhere. Warning: Be aware that Polaroid Ruby Pro V463’s connection share uses mobile data. It indicates that the net usage you are using is deducted from your portable plan. So, it’s possible to configure a limit on the consumption of mobile data. So, after a certain limit, the Polaroid Ruby Pro V463 hotspot wifi turn off.