Setting up HotSpot or Tethering on Motorola

Sharing the web connection of Motorola in wifi is an incredibly practical feature on the Motorola. Indeed, putting the Motorola in modem mode makes it possible to share the connection of the cellphone with your entourage or with your different devices. So, in the event you don’t have a suitable Wifi access where you are, we will observe in the following paragraphs how to transform the Motorola into a wifi hotspot. We will initially find out how to turn on and configure connection sharing. We will find out in a secondary step what is the connection sharing and what it implies for the Motorola.Tethering-HotSpot-Motorola

How to share the Motorola connection

To turn your Motorola into a Wi-Fi hotspot, it’s extremely straightforward. Indeed, it is actually only necessary to accomplish 2 steps. The 1st is to enable connection sharing and the secondary is to set up the network. All you need to do is stick to the 2 steps below.

Enable Net Connection Sharing on Motorola

To share your Motorola net connection, you’ll first have to enable connection sharing. To get this done, go to the Motorola Settings menu . When you’re there, you need to go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have three options available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when ever the Motorola is connected to a computer
  • Share by using telephone bluetooth

When you have made your decision, you just have to check to activate the sharing of the Motorola connection. When it is active, you should find out a little icon show up in the notifications bar.

Configure Wifi connection sharing on Motorola

At this point that you’ve set your Motorola in modem mode, you’ll have to set up the network so other devices can connect. Just those who have opted for Wi-Fi sharing are affected by the setup. To set up, click Via Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you may change the password to connect to the Motorola network. So, enter the security password of your choice and confirm. Finally, you may also change the network name in the event you wish.

Connect to the Motorola network

At this point that the network is configured, you may connect to it with other devices. To get this done, you just simply have to bring your system and look for the Motorola network among the available WIFI networks. When you have found it, you can log in using the password that you configured. And there you have a great net connection!

What is Connection Sharing on a Motorola

To make it simple, sharing a connection means sharing the 3G or 4G connection of the Motorola with other devices. So it is ideal when ever you will not have a WiFi connection but you have 3G or 4G network on your Motorola. This permits you to have a good connection almost everywhere. Warning: Remember that Motorola’s connection share uses mobile data. It indicates that the web usage you are using is deducted from your mobile plan. So, it is possible to configure a limit on the consumption of mobile data. So, after a specific limit, the Motorola hotspot wifi turn off.